Abstract
Experimental and theoretical stress analysis methods are used to evaluate the mechanical behaviour of external fixation devices as load-bearing structures. For the experimental part, a modular assembly was fabricated from which unilateral and bilateral fixators of different design configurations were assembled and tested under various loading conditions. A reflective photoelasticity technique was used to study the effect of frame configuration on the stress patterns generated around the pin-bone interface. Finite element models of each design were also generated using three-dimensional beam and shell elements. Spring elements were used to model the pin/sidebar clamp. It is shown that close correspondence between the experimental and theoretical methods of investigation is obtained when the flexibility of the pin/side-bar clamp is taken into account. It is also shown that a unilateral design, modified by attaching a second side-bar to the first and connecting them by means of a semicircular component, can achieve some of the structural advantages of bilateral fixators without the clinical disadvantage of transfixing pins.
Get full access to this article
View all access options for this article.