Sage Journals: Discover world-class research

Abstract

To help the design of more reliable and efficient two-stage, very high pressure reciprocating gas compressors, a theoretical model and a numerical code for simulating compression processes in the compressors were developed and validated. The theoretical model considers time-dependent conservation equations of species, mass and energy, the equation of state, kinematic relationships and various convective heat-transfer correlations The theoretical model was solved numerically. Experimentally, a 207 MPa (30 000 lb/in²) very high pressure gas compressor was instrumented for measurements of various transient flow properties. The experimental data were analysed to achieve a better understanding of the compression processes of the compressor as well as for model validation. A parametric study was conducted with the theoretical model and numerical code to investigate the effect of various compressor parameters on the compressor performance. Among the parameters studied, it was found that the dead-end volume had the strongest effect on the performance of the compressor. A reduced dead-end volume would increase the volumetric efficiency and the maximum gas-phase temperature and pressure in the first-stage cylinder.

Get full access to this article

View all access options for this article.

References

Pfister

Waterjet cutting of high speed webs. Trans. ASME, 1991, PVP-217, 229–232.

Chen

C. L.

Flow characteristics of very high-pressure gas compressors. MS paper, The Pennsylvania State University, December 1990.

Jacobsen

R. T.

Stewart

R. B.

J. Phys. Chem. Ref. Data, 1973, 2, 757–922.

Din

Thermodynamic functions of gases, Vol. 3, 1961 (British Oxygen Company Limited, Scientific Division, London).

T. T.

Study of high-pressure heat transfer in gas compressors. PhD Thesis, The Pennsylvania State University, December 1993.

Wylen

G. J.

Sonntag

R. E.

Fundamentals of classical thermodynamics, 1985, pp. 113–117 (John Wiley, Chichester).

T. T.

Numerical simulation of gas-dynamic and heat-transfer processes in two-stage, very high-pressure gas compressors. MS paper, The Pennsylvania State University, December 1991.

Dittus

F. W.

Boelter

L. M. K.

University of California Publications in Engng Berkeley, 1930, 2, 443.

Incropera

F. P.

DeWitt

D. P.

Fundamentals of heat and mass transfer, 1981 (John Wiley, New York).

10.

Kays

W. M.

Crawford

M. E.

Convective heat and mass transfer, 1980 (McGraw-Hill, New York).

11.

Property Data Update, Official Standards of the National Standard Reference Data Service of the USSR, 1987, Vol. 1, pp. 8–20 (Hemisphere, Washington, D. C.).

12.

IMSL Library. Problem-solving software system for mathematical and statistical Fortran programming, 1984 (IMSL Inc.).

13.

White

K. H.

Prediction and measurement of compressor valve losses. Presented at ASME Petroleum Mechanical Engineering and Pressure Vessels and Piping Conference, New Orleans, La., 1972, pp. 17–21.

14.

Singh

P. J.

A digital reciprocating compressor simulation program including suction and discharge piping. International Compressor Engineering Conference, Purdue University, 1984, pp. 129–138.

15.

Loomis

A. W.

Compressed air and gas data, 1982, pp. (Ingersoll-Rand).

Numerical Simulation and Experimental Investigation of Compression Processes of Two-Stage,very High Pressure Reciprocating Gas Compressors

Abstract

Get full access to this article

References