As a part of a phenomenological model, a method for simulating the wall/jet interaction in a direct injection diesel engine is proposed. The method is based on the application of the momentum conservation equation in the different directions in which the wall jet is spread, and takes into account both the interaction with the combustion chamber geometry and with swirl. It takes as initial conditions the results of calculating the free jet, which is divided into packages. The predictions provide good agreement with those by other researchers.
Get full access to this article
View all access options for this article.
References
1.
WerlbergerP.CartellieriW. P.Fuel injection and combustion phenomena in high speed D.I. diesel engine observed by means of endoscopic high speed photography. SAE paper 870097, 1987.
2.
YamaguchiI.NakahiraT.KomoriM.KobayashiS.An image analysis of high speed combustion photographs for D.I. diesel engine with high pressure fuel injection. SAE paper 901577, 1990.
3.
IidaN.HirawoK.SatoG.T.Experimental study of transient gas jet impinging on a wall. SAE paper 900479, 1990.
4.
KatsuraN.SaitoM.SendaJ.FujimotoH.Characteristics of a diesel spray impinging on a flat wall. SAE paper 890264, 1989.
5.
FujimotoH.SendaJ.NagaeM.HashimotoA.SaitoM.KatsuraN.Characteristics of a diesel spray impinging on a flat wall. International Symposium COMODIA 90, Kyoto, 1990, pp. 193–198.
6.
HiroyasuH.NishidaK.MinJ. C.Computed tomographic study on internal structure of a diesel spray impinging on a flat wall. International Symposium COMODIA 90, Kyoto, 1990, pp. 205–210.
7.
ChenB. X.WangR. S.An experimental study and computer analysis on oblique impingement of diesel type spray upon a plane wall. International Symposium COMODIA 90, Kyoto, 1990, pp. 299–302.
8.
WolfR. S.ChengW. K.Heat transfer characteristics of impinging diesel sprays. SAE paper 890439, 1989.
BrunelloG.CalleraS.CogheA.CossaliG.E.GammaF.LDV and PDA analysis of spray-wall interaction. ICLASS1991 Conference Proceedings, Gaithersburg, Maryland, 1991.
11.
IdoumA.PackerJ. P.WallaceF. J.CharltonS. J.An experimental and analytical study of jet impingement and wall jets in high swirl D.I. diesel engines using the hydraulic analogy. SAE paper 850263, 1985.
NaberJ. D.ReitzR. D.Modelling engine spray/wall impingement. SAE paper 880107, 1988.
14.
WatkinsA. P.WangD. M.A new model for diesel spray impaction on walls and comparison with experiments. International Symposium COMODIA 90, Kyoto, 1990, pp. 243–248.
15.
YuleA. J.WatkinsA. P.MirzaR.KhaleghiH.AvalS. M.WangD. M.Investigations of diesel spray structure and impaction. ICLASS-Europe Sixth Annual Conference, Pisa, Italy, 1990.
16.
O'RourkeP. J.BraccoF. V.Modelling of drop interactions in thick sprays and a comparison with experiments. Proceedings of IMechE Conference on Stratified charge automotive engineering, 1980, pp. 101–116 (Mechanical Engineering Publications, London).
17.
MeguerdichianM.WatsonN.Prediction of mixture formation and heat release in diesel engines. SAE paper 780225, 1978.
18.
DentJ. C.MethaP. S.Phenomenological combustion model for a quiescent chamber diesel engine. SAE paper 811235, 1981.
19.
LipkeaW. H.De JoodeA. D.A model of a direct injection diesel combustion system for use in cycle simulation and optimization studies. SAE paper 870573, 1987.
20.
KyriakidesS. C.DentJ. C.MehtaP. S.Phenomenological diesel combustion model including smoke and NO emission. SAE paper 860330, 1986.
21.
SingalS. K.PundirB. P.MehtaP. S.Modelling spray/wall interaction in swirling flows for DI diesel engines. Proc. Instn Mech. Engrs, Part D, 1990, 204 (D3), 245–253.
22.
SindanoH.DentJ. C.Modelling of injected fuel film development and evaporation in a wall-wetting direct injection diesel engine. IMechE Conference on Combustion in engines—technology and applications, 1988, paper C60/88, pp. 59–72.
23.
LapuertaM.Estudio fenomenológico de la combustión en motores diesel rápidos de inyección directa. Doctoral thesis, Universidad Politécnica de Valencia, 1988.
24.
DesantesJ. M.LapuertaM.TinautF. V.Combustion dans les moteurs diesel rapides a injection directe. Modele base sur l'interaction entre le jet et le mouvement de l'air dans le cylindre. Entropie, 1989, 148.
25.
PayriF.DesantesJ. M.LapuertaM.A phenomenological model for calculating D.I. diesel engine performance and emissions. International Congress on Calcul scientifique et automobile, Paris, 1990 (SIA).
26.
RifeJ. M.HeywoodJ. B.Photographic and performance studies of diesel combustion using a rapid compression machine. SAE paper 740948, 1974.
27.
HirakiH.RifeJ. M.Performance and NOx model of a direct injection stratified charge engine. SAE paper 800050, 1980.
28.
SinnamonJ. F.LancasterD. R.StienerJ. C.An experimental and analytical study of engine fuel spray trajectories. SAE paper 800135, 1980.
29.
KobayashiH.YagitaM.KamimotoT.MatsuokaS.Prediction of transient diesel sprays in swirling flows via a modified 2-D jet model. SAE paper 860332, 1986.
30.
KuniyoshiH.YamamotoH.FujimotoH.SatoG. T.Investigation of the characteristics of diesel fuel spray (third paper: Impinging on a flat plate). J. of MESJ, 1980, 15, 57–64.
31.
PayriF.DesantesJ. M.RevillaJ.GonzálezF.Swirl influence on the performance and emissions of 2 liter per cylinder DITC diesel engine. International Conference EAEC, Strasbourg, 1991, paper 91046.
