Abstract
A proportional pressure relief valve is used to control the pressure supply to an electrohydraulic servo-valve in conjunction with a novel yet simple way of eliminating position error. This requires the measurement of the load force and a means of adjusting the supply pressure as the load force changes. The technique hinges on the need to have symmetrical underlapping of the servo-valve spool, and this then enables position error to be eliminated, the transient behaviour to be optimized, and a fortuitous improvement in power dissipated. The concept is verified by the use of a two-axis system, the main position control axis being rotated in a vertical plane, thus creating a variable load. The effect of pressure adaptation is clearly shown for slowly varying rotation of the test axis, pressure adaptation being achieved via a microcomputer interfaced between the load-sensing transducer and the proportional pressure relief valve.
The dynamic performance for rapid changes in the demanded position is studied, and it is shown how a linearized transfer function approach leads to a simple design strategy. It is shown that fluid compressibility effects are negligible owing to an appropriate choice of servo-valve spool underlap, which also leads to a robust design in terms of the closed-loop damping ratio. This leads to simplicity in maintaining optimum dynamic performance, which is then only affected by supply pressure changes which are known.
Get full access to this article
View all access options for this article.