The performance of reciprocating pumps with self-acting valves is dependent upon the dynamic characteristics of the valves. Particularly when the pumps are working at high speed, delays in valve operation can lead to cavitation, reduction in volumetric efficiency and increased noise and wear. The behaviour of the valves is complex and difficult to predict.
A computer program for the modelling of the dynamic behaviour of such pumps has been developed. The mathematical models of the components are described in this paper. The modelling of the effects of cavitation is included. Results compare favourably with experimental measurements.
Get full access to this article
View all access options for this article.
References
1.
EdgeK. A.BrettP. N.LeahyJ. C.Digital computer simulation as an aid in improving the performance of positive displacement pumps with self-acting valves. Proc. Instn Mech. Engrs, Part B, 1984, 198(14), 267.
2.
SinghP. J.MadavanN. K.Complete analysis and simulation of reciprocating pumps including system piping. Proceedings Fourth International Pump Symposium, 1987, pp. 55 (ASME).
3.
JohnstonD. N.EdgeK. A.VaughanN. D.Experimental investigation of flow and force characteristics of hydraulic poppet and disc valves. Proc. Instn Mech. Engrs, Part A, 1991, 205 (A3), 161–171.
4.
MacLarenJ. F. T.KerrS. V.An analytical and experimental study of self-acting valves in a reciprocating air compressor. Proc. Instn Mech. Engrs, 1969–70, 184, Pt 3R, 24.
5.
TomlinsonS. P.TilleyD. G.Practical experience in simulating industrial fluid power systems. Second International Fluid Power Workshop, University of Bath, Sept. 1989.
6.
HairerE.NorsettS. P.WannerG.Solving ordinary differential equations I: nonstiff problems, Series in Computational Mathematics, 1987 (Springer).
7.
CleijneH.SmuldersP.Valve motion in piston pumps for waterpumping windmills, International Conference on Positive Displacement Pumps, Chester, England, 1986, 63 (BHRA, Cranfield).
8.
EdgeK. A.DarlingJ.Cylinder pressure transients in oil hydraulic pumps with sliding plate valves. Proc. Instn Mech. Engrs, Part B, 1986, 200 (B1), 45–54.
9.
HollJ. W.Cavitation hysteresis. Proceedings Symposium on Cavitation in Fluid Machinery, Chicago, 1965 (ASME)
10.
EdgeK. A.JohnstonD. N.The ‘secondary source’ method for the measurement of pump pressure ripple characteristics. Part 2: Experimental results. Proc. Instn Mech. Engrs, Part A, 1990, 204, 41–46.
11.
MillerJ. E.The reciprocating pump—theory, design and use, 1987 (Wiley).
