This paper discusses the merits of the peening effect in improving the fatigue resistance of compounds and looks at machines that perform the task. There is a lack of information about the process but now a significant increase in studies dealing with peening is helping to overcome problems.
Get full access to this article
View all access options for this article.
References
1.
FuchsH. O.Defects and virtues of the Almen strip. Second International Conference on Shot peening, 1984, pp. 76–77 (SAE).
2.
AlmenJ.Shot peening to increase fatigue resistance. SAE (Trans.), 1943, 51(7).
3.
DeloughryR. J.Al HasaniS. T. S.BrowneM. A.GreenR. G.Instrumentation and control of impact finishing processes. Second International Conference on Shot peening, 1984, p. 67 (SAE).
4.
GreenR. G.FooS. H.Solids mass flow measurement in pneumatic pipelines by F. M. transducer and microcomputer. Int. J. Storage and Handling Bulk Mater., December 1982, 2(4), 789–792.
5.
HaleDavid. Shot quality and how to select shot for peening. The Shotpeener, July 1988, Vol. 2, No. 2. Amsteel Division, Ervin Industries Inc.
6.
MaltbyF. C. First International Conference on Shot peening, 1981, p. 295 (SAE).
7.
MeguidS. A.DuxburyJ. K.A practical approach to forming and strengthening of metallic components using impact treatment. First International Conference on Shot peening, 1981, p. 217 (SAE).
8.
OdustoteS.GreenR. G.Instrumentation for improved control of a shot-peening process. IMEKO XI, 1988.
9.
RobertsonG. T.The effect of shot size on the residual stresses resulting from shot-peening. SAE paper 710284. X-ray Fatigue Division, SAT Design and Evaluation Committee, Ann-Arbor, Michigan. 1–5 December 1968.
10.
JohnR.Shot peening, Technical File 31. Engineering, July 1976, pp. i–viii.
11.
SimpsonRoger S.GaribayRobert P.Quantification of shot peening process variables affecting workpiece performance. Process control and shot peening media. SAE Twenty-first Airline Finishing Forum, February 1988.
12.
WigmoreG.MilesL.The use of shot peening to delay stress corrosion crack initiation in austenitic 8 Mn 8 Ni 4 Cr generator end ring steel. First International Conference on Shot peening, 1981, p. 185 (SAE).
13.
WoelfulM.Shot peening—control and measurement. Aerospace Congress and Exposition, 1982, p. 15 (McGraw Hill).
