Process Safety—An Engineering Achievement

Abstract

Up to the late 1960s the chemical industry looked upon safety as a non-technical subject but after a number of serious accidents technical people with production experience began to be appointed as safety advisers. There had been so little systematic thinking that it was not difficult for them to make improvements such as:

the development of systematic methods, now widely used, for identifying and assessing hazards,

the development of inherently safer designs (in contrast, the industry has been slower to adopt this change),

the development of a new attitude towards human error.

These, and other, changes produced a dramatic improvement in the industry's accident rate and raised the reputation of the subject to today's level.

The 1980s were a period of consolidation rather than innovation. Finally, we look ahead to the 1990s.

Get full access to this article

View all access options for this article.

References

Kletz

T. A.

Hazard analysis—a quantitative approach to safety. In Major loss prevention in the process industries, 1971, Symposium Series 34, pp. 75–81 (Institution of Chemical Engineers, Rugby).

Kletz

T. A.

The application of hazard analysis to risks to the public at large. In Chemical engineering in a changing world, Proceedings of the World Congress of Chemical Engineering, 1976, pp. 397–410 (Elsevier, Amsterdam).

Health and Safety Executive. The tolerability of risks from nuclear power stations, 1988 (HMSO, London).

Health and Safety Executive. Risk criteria for land-use planning in the vicinity of major industrial hazards, 1989 (HMSO, London).

Lawley

H. G.

Operability studies and hazard analysis. Chem. Engng Prog., 1974, 70(4), 45–56.

Knowlton

Hazard and operability studies, 1977 (Chemical Industries Association, London).

Kletz

T. A.

Cheaper, safer plants—notes on inherently safer and simpler plants, 2nd edition 1985 (Institution of Chemical Engineers, Rugby).

Kletz

T. A.

Plant design for safety—a user-friendly approach, 1991 (Hemisphere, New York).

Reactions. Atom, 1989, 394, 35.

10.

Turney

R. D.

Designing plants for 1990 and beyond. Process Safety and Environmental Protection, 1990, 68(B1), 12–16.

11.

Ramshaw

Higee distillation—an example of process intensification. The Chemical Engineer, 1983, 389, 13–14.

12.

Ramshaw

Opportunities for exploiting centrifugal fields. The Chemical Engineer, 1987, 437, 17–21.

13.

Kletz

T. A.

An engineers' view of human error, 1985 (Institution of Chemical Engineers, Rugby).