An Equivalent Reduced Modelling Method and its Application to Shaft—Blade Coupled Torsional Vibration Analysis of a Turbine

Abstract

A coupled vibrating system (for example turbine-generator set), consisting of a main system (for example shaft system) and a sub-system (for example blade system) which are connected at bonding points (for example the centre boss of a blade), is equivalently reduced to a model suitable for analysis. According to this modelling technique, the eigenvalue analysis of the uncoupled flexible sub-system is done first under the assumption of the fixed bonding point. Then, an equivalent mass-spring system is produced for each eigenmode of the uncoupled subsystem. In this way, the main system plus the additional equivalent mass-spring model of the sub-system is combined into a global system model.

This modelling technique is applied to the shaft-blade coupled vibration problems in an actual turbine-generator set and its effectiveness is provided with experimental test results.

Get full access to this article

View all access options for this article.

References

La Rosa

J. A.

Kung

D. G. C.

Rosard

D. D.

Analysis of turbine blade vibrations induced by electrical-mechanical interactions. Joint Conference on Power Generation, 1980.

Manabe

Torsional vibration measurements by generator L-L short-circuit at Ikata No. 1 power station (in Japanese). Sikoku Electric Power Company report, 40, 1982.

Jainski

Stresses of turbo-generator shafts and foundations caused by electrical system faults. IMechE Conference on Vibrations in rotating machinery, 1980, pp. 9–16 (Mechanical Engineering Publications, London).

Schwibinger

Nordmann

Wohlrab

Steigleder

Wutsdorff

Torsional vibrations in turbogenerators due to network disturbances. Trans. ASME Des. Engng, 1987, 2, 501–510.

Rusche

P. A.

Turbine-generator shaft stresses due to network disturbances. IEEE Trans., Power Apparatus and Systems, 1980, PAS-99(6), 2146–2152.

Michimura

Tamura

Coupled vibration analysis for bladed disk assemblies and flexible shafts (first report, irrotational condition) (in Japanese). Bull. Japan. Soc. Mech. Engrs, 1984, 50(458C), 1930–1938.

Kosinov

Y. P.

Flippov

A. P.

Vibration of rotors in turbine units with short circuit of the generator. Teploenergetica, 1974, 21(6), 70–73.

Hammons

T. J.

Stressing of large turbine-generators at shaft couplings and LP turbine final-stage blade roots following clearance of grid system faults and faulty synchronisation. Joint Conference on Power Generation, 1978, 1–12 (IEEE).

Matsushita

Namura

Yoshida

Kaneko

Okabe

Torsional vibration analysis of turbine-generator-blade coupled system. American Power Conference, 1989, 51 (to be published).

10.

Okabe

Kaneko

Matsushita

Namura

Yoshida

Coupled vibration analysis: Torsional vibration of turbine-generator-blade coupled system. Twelfth ASME Conference on Mechanical vibration and noise, 1989, Vol. 18, pp. 135–140.

11.

Craig

R. R.

Jr Bampton

M. C. C.

Coupling of substructures for dynamic analysis. AIAA J., 1968, 6(7), 1313–1319.

12.

Kuhar

E. J.

Dynamic transformation method for modal synthesis. AIAA J., 1974, 12(5), 672–678.

13.

Michimura

Nagamatu

Bladed disk vibration (in Japanese). Bull. Japan Soc. Mech. Engrs, 1989, 45(399C), 1206–1216.

14.

Watanabe

Kawamura

Goto

Okuda

Influence of high-speed reclosing on turbine-generators and the shaft system. Hitachi Rev., 1978, 27(1), 33–38.

15.

Sugitani

Kawamoto

Reliability enhancement of turbine-generator system against blade-shaft coupled vibration. American Power Conference, 1988, 50, 172–176.

16.

Kawatsu

Katsuyama

Hizume

Shinozaki

Mitsuyama

Ishiguro

Ueda

Torsional vibration monitor. KSME-JSME Joint Vibration Conference, 1987.

17.

Walker

D. N.

Bowler

C. E. J.

Jackson

R. L.

Hodges

D. A.

Results of subsynchronous resonance test at Mohave. IEEE Trans., Power Apparatus and Systems, 1975, PAS-94(5), 1878–1886.

18.

Raczkowski

Kung

G. C.

Turbine-generator torsional frequencies—field reliability and testing. American Power Conference, 1978, 40, 1116–1123.

19.

Isii

Murakami

Otawara

Okabe

Field telemetry of blade-rotor coupled torsional vibration at Matuura power station No. 1 unit. Sixth Workshop on Rotordynamic Instability Problems in High Performance Turbomachinery, 1990.

An Equivalent Reduced Modelling Method and its Application to Shaft—Blade Coupled Torsional Vibration Analysis of a Turbine—Generator Set

Abstract

Get full access to this article

References