Most engineering point contacts operate in, or close to, the elastic piezoviscous regime. A general interpolation procedure is presented by which the minimum film thickness in any such contact may be estimated. This procedure matches all existing numerical and experimental results with high accuracy. Design charts are provided and these enable the minimum film thickness to be read directly and also allow the effect of changes in contact geometry and operating conditions to be assessed.
RangerA. P.EttlesC. M. M.CameronA.The solution of the point contact elastohydrodynamic problem, Proc. R. Soc. Lond., 1975, A346, 227–244.
3.
HamrockB. J.DowsonD.Isothermal lubrication of point contacts—Part I Theoretical formulation, ASME J. Lubric. Tech., 1976, 98, 223–229.
4.
HamrockB. J.DowsonD.Isothermal lubrication of point contacts—Part II Ellipticity parameter results. ASME J. Lubric. Tech., 1976, 98, 375–383.
5.
HamrockB. J.DowsonD.Isothermal lubrication of point contacts—Part III Fully flooded results. ASME J. Lubric. Tech., 1977, 99, 264–276.
6.
HamrockB. J.DowsonD.Elastohydrodynamic lubrication of elliptical contacts for materials of low elastic modulus, I Fully flooded conjunction. ASME J. Lubric. Tech., 1978, 100, 236–245.
7.
EvansH. P.SnidleR. W.Inverse solution of Reynolds equation of lubrication under point contact elastohydrodynamic conditions. ASME J. Lubric. Tech., 1981, 103, 539–546.
8.
EvansH. P.SnidleR. W.The isothermal elastohydrodynamic lubrication of spheres. ASME J. Lubric. Tech., 1981, 103, 547–557.
9.
EvansH. P.SnidleR. W.Elastohydrodynamic lubrication of point contacts at heavy loads. Proc. R. Soc. Lond., 1982, A382, 183–199.
10.
MostofiA.GoharR.Oil film thickness and pressure distribution in elastohydrodynamic point contacts. J. Mech. Engng Sci., 1982, 24, 173–182.
11.
ChittendenR. J.DowsonD.DunnJ. F.TaylorC. M.A theoretical analysis of the isothermal lubrication of concentrated contacts. I Direction of lubrication entrainment coincident with the major axis of the contact ellipse. Proc. R. Soc. Lond., 1985, A397, 245–269.
12.
ChittendenR. J.DowsonD.DunnJ. F.TaylorC. M.A theoretical analysis of the isothermal lubrication of concentrated contacts. II General case with lubrication entrainment along either principal axis of the contact ellipse or at some intermediate angle. Proc. R. Soc. Lond., 1985, A397, 271–293.
13.
ChittendenR. J.DowsonD.TaylorC. M.The lubrication of elliptical conjunctions in the elastic isoviscous regime with entrainment along either principal axis. Proceedings 13th Leeds-Lyon Symposium on Tribology, Fluid film lubrication—Osborne Reynolds' centenary, Leeds, 1981, 247–260 (Elsevier).
14.
KwehC. C.EvansH. P.SnidleR. W.Elastohydrodynamic lubrication of heavily loaded circular contacts. Proc. Instn Mech. Engrs, 1989, 203, 133–148.
15.
ThorpeN.GoharR.Oil film thickness and shape for a ball sliding in a grooved raceway. ASME J. Lubric. Tech., 1972, 94, 199–209.
16.
KoyeK. A.WinerW. G.An experimental evaluation of the Hamrock and Dowson minimum film thickness equation for fully flooded EHD contacts. ASME J. Lubric. Tech., 1980, 103, 284–294.
17.
JohnsonK. L.Regimes of elastohydrodynamic lubrication. J. Mech. Engng Sci., 1970, 12, 9–16.
18.
KapitzaP. L.Hydrodynamic theory of lubrication during rolling. Zh Tekh. Phys., 1955, 25, 759–775.
19.
BreweD. E.HamrockB. J.TaylorC. M.Effect of geometry on hydrodynamic film thickness. ASME J. Lubric. Tech., 1979, 101, 231–239.
20.
HookeC. J.The elastohydrodynamic lubrication of heavily loaded point contacts. J. Mech. Engng Sci., 1980, 22, 183–187.
21.
DowsonD.DunnJ. F.TaylorC. M.The piezoviscous fluid, rigid solid regimes of lubrication. Proc. Instn Mech. Engrs, Part C, 1983, 197, 43–51.
22.
HookeC. J.Calculation of clearances in soft point contacts. ASME J. Lubric. Tech., 1988, 110, 167–173.
23.
HookeC. J.Minimum film thicknesses in lubricated point contacts operating in the elastic piezoviscous regime. Proc. Instn Mech. Engrs, Part C, 1988, 202, 73–84.
24.
GreenwoodJ. A.Film thicknesses in circular elastohydrodynamic contacts. Proc. Instn Mech. Engrs, Part C, 1988, 202, 11–17.
25.
SutcliffeM. P. F.Central film thicknesses in elliptical contacts. Proc. Instn Mech. Engrs, Part C, 1989, 203, 387–392.
26.
HookeC. J.The elastohydrodynamic lubrication of heavily loaded contacts. J. Mech. Engng Sci., 1977, 19, 149–156.
27.
HookeC. J.The influence of piezoviscosity on the minimum film thickness in heavily loaded elastohydrodynamic point contacts. Proc. Instn Mech. Engrs, Part C, 1990, 204, (C2), 117–125.
28.
Film thickness in lubricated Hertzian contacts. Part 2. Point contacts. ESDU item 89045, 1989 (Engineering Sciences Data Unit International Plc, London).
