Sage Journals: Discover world-class research

Abstract

This paper describes a method for predicting the concentration distribution of water in crude oil in a pipe section downstream of a region of mixing and droplet break-up.

The complexity of the problem and the necessary simplifications are described. The method with its approximations is justified on grounds of possible savings in financial outlay.

Details of governing equations, computational method and boundary conditions lead on to the link between forces on the droplet and the velocity of the droplet relative to the bulk liquid. The model incorporates turbulence enhancement and decay, and secondary velocities likely to approximate to those following a T-piece or bend or swirl-creating element.

The computer program was tested against data provided by BP and the results suggest that if the predictions indicate adequate mixing then they are likely to underestimate the uniformity of the mixture.

The predictions may be used to assess the suitability for sampling based on Case 1 of the draft ISO Standard (1) but must not be used to assess the suitability for sampling based on Case 2 of the draft standard unless fall-out has been allowed for in the program.

The paper reviews the assumptions and approximations involved in this model. Further work in these areas is needed to allow the model to be used with greater confidence.

Get full access to this article

View all access options for this article.

References

Petroleum liquids—automatic pipeline sampling. ISO draft proposal ISO/DIS 3171, 1985 (International Standards Organization).

Baker

R. C.

Sampling water in oil. A critical assessment of the validity of ISO/DIS 3171 Annex A for the estimation of water in oil dispersion, 1986 (Cranfield Press).

Karabelas

A. J.

Vertical distribution of dilute suspensions in turbulent pipe flow. Am. Inst. Chem. Engrs J., 1977, 23(4), 426–434.

Karabelas

A. J.

Droplet size spectra generated in turbulent pipe flow of dilute liquid/liquid dispersions. Am. Inst. Chem. Engrs J., 1978, 24(2), 170–180.

Segev

Mechanistic model for estimating water dispersion in crude oil flow. Annual AIChE meeting, San Francisco, California, 25–30, November 1984 (American Institute of Chemical Engineers).

Baker

R. C.

Hayes

E. R.

Lenn

C. P.

Computational method to predict concentration distribution and number of samples required for representative sampling of water in water-in-oil pipeline. Presented at the Third International Conference on Multi-Phase Flow, The Hague, Netherlands, 18–20 May 1987.

Hinze

J. O.

Fundamentals of the hydrodynamic mechanism of splitting in dispersion processes. Am. Inst. Chem. Engrs J., 1955, 1(3), 289–295.

Soo

S. L.

Tung

S. K.

Deposition and entrainment in pipe flow of a suspension. Powder Technol., 1972, 6, 283–293.

Rodi

Turbulence models for environmental problems. Lecture Series on Prediction methods for turbulent flow, Von Karman Institute for Fluid Dynamics, 15–19 January 1979.

10.

Miller

D. S.

Internal flow systems, 1978 (BHRA, Cranfield).

11.

Lamb

Hydrodynamics, 1945 (Cambridge University Press).

12.

Batchelor

G. K.

The theory of homogeneous turbulence, 1953 (Cambridge University Press).

13.

Picart

Berlemont

Gouesbet

Modelling and predicting turbulence fields and the dispersion of discrete particles transported by turbulent flows. Int. J. Multiphase Flow, 1986, 12(2), 237–262.

14.

Batchelor

G. K.

An introduction to fluid dynamics, 1967 (Cambridge University Press).

15.

Hinze

J. O.

Turbulence, 1975 (McGraw-Hill, New York).

16.

Moore

W. E.

Kirouac

G. J.

Measurements of turbulent flow induced by 90-degree cylindrical elbow. Knolls Atomic Power Laboratory report KAPL-4142, September 1981.

Computational Method to Assess Concentration of Water in Crude Oil Downstream of a Mixing Section

Abstract

Get full access to this article

References