The transmission line modelling (t.l.m.) method is well established as a numerical routine for the solution of electromagnetic wave problems and electrical lumped networks. In this paper the method is adapted for the solution of dynamic mechanical systems.
The method provides discrete models suitable for manipulation by digital computer and straightforward modelling of non-linearities. A complete modelling example of a bearing with non-linear friction characteristics is presented.
Get full access to this article
View all access options for this article.
References
1.
BandlerJ. W.JohnsP. B.RizkM. R. M.Transmission line modelling and sensitivity evaluation for lumped network simulation in the time domain. J. Franklin Inst., July 1977.
2.
BoucherR. F.KitsiosE. E.Simulation of fluid network dynamics by transmission line modelling. Proc. Instn Mech. Engrs, Part C, 1986, 200(C1), 21–29.
3.
JohnsP. B.Microcomputer modelling for wave, diffusion and lumped network design. Proceedings of the Second International Conference on Engineering software, London, March 1981.
4.
JohnsP. B.Numerical modelling by the t.l.m. method. Proceedings of the International Symposium on Large engineering systems (Ed. WexlerA.), 1977, pp. 139–151 (Pergamon Press, Oxford).
5.
TimoshenkoS.YoungD. H.Vibration problems in engineering, 3rd edition, 1955 (D. Van Nostrand, New York).
6.
JohnsP. B.O'BrienM.Use of the transmission line modelling method to solve non-linear networks. The Radio and Electronic Engr, 1980, 50(1/2).
7.
JohnsP. B.The art of modelling. Electronics and Power, August 1979, p. 565.
8.
SwansonS. A. V.Engineering dynamics, 1963 (The English Universities Press, London).
9.
PartridgeG. J.Analysis of a non-linear static friction model using transmission line modelling. MSc thesis, 1983, Nottingham University.
10.
CockerhamG.ColeM.Stick-slip stability by analogue simulation. Wear, 1976, 36.
