Describes results of the elastohydrodynamic lubrication analysis of the type of elliptical contact which occurs in high conformity gears.
Get full access to this article
View all access options for this article.
References
1.
HamrockB. J.DowsonD.Isothermal elastohydrodynamic lubrication of point contacts: Part III-fully flooded results. Trans ASME, J. Lubric. Tech., 1977, 99, (2). 264–276.
2.
HamrockB. J.DowsonD.Ball bearing lubrication: the elastohydrodynamics of elliptical contacts, Wiley, 1981.
3.
ShotterB. A.Experiences with conformal/W-N gearing. Proc. World Congress on Gearing. Paris 1977. Reprinted in Machinery, 5 Oct. 1977.
4.
WrenF. J.MoverC. A.Understanding friction and ehl films in concentrated contacts of a tapered roller bearing. Elastohydrodynamic Lubrication, Instn. Mech. Engrs. Symposium, 1972, paper C10/72.
5.
KoyeK. A.WinerW. O.An experimental evaluation of the Hamrock and Dowson minimum film thickness equation for fully flooded ehd point contacts. Trans. ASME, J. Lubric. Tech., 1981, 103, (2).
6.
EvansH. P.SnidleR. W.The elastohydrodynamic lubrication of point contacts at heavy loads. Proc. R. Soc. Lond., 1982, A382, 183–199.
7.
DowsonD.HigginsonG. R.A numerical solution to the elastohydrodynamic problem. J. Mech. Engng. Sci., 1959, 1, (1), 6.
8.
MostofiA.GoharR.Oil film thickness and pressure distribution in elastohydrodynamic point contacts. J. Mech. Engng. Sci., 1982, 24, (4), 173–182.
