A technique for the numerical optimization of a finite element model of a high energy rate forming machine is introduced. Both the nature of the impulsive loading and selected structural dimensions are optimized with respect to a simple measure of the noise created during a forging operation. The authors conclude that the technique could be applied to other structures or could be based on a more sophisticated noise criterion although dynamic finite element analyses demand considerable computing power.
Get full access to this article
View all access options for this article.
References
1.
OsmanA. E. M.Noise and vibration in a H.E.R.F. Machine. PhD thesis, Department of Mechanical Engineering, University of Birmingham, Aug. 1975.
2.
SadekM. M.TobiasS. A.Research on noise generated in impact forming machines at the University of Birmingham, 1971–1976. Presented at the 17th International MTDR Conference. Birmingham, Sept. 1976.
3.
GregorianV. Z.SadekM. M.TobiasS. A.Noise generated by a laboratory drop hammer and its interrelation with the structural dynamics and process parameters. Presented at the Atlanta Conference of Forging, Atlanta, Georgia, USA, Sept. 1975; Int. J. Mach. Tool Des Res., 1976, 16, No. 4, 301–318.
4.
OsmanA. E. M.SadekM. M.KnightW. A.Noise and vibration analysis of an impact forming machine. Presented at the Design Engineering Technical Conference, Cincinnati, Ohio, USA, Sept. 1973; Trans. ASME, J. Engng Ind. 1974, 233–240.
5.
TaylorS.Computer study of a milling machine. Presented at the 17th International MTDR Conference, Birmingham, Sept. 1976.
6.
VasconcelosH. F.TaylorS.SadekM. M.The response of a HERF machine to impact loading using finite elements. Paper No. 79-DET-40, presented at the ASME Design Engineering Technical Conference, St. Louis, Mo., USA, 10–12, Sept. 1979.
7.
FrancisD. T. I.The prediction of noise generated in impact forming machines. PhD thesis, Department of Mechanical Engineering, The University of Birmingham, May 1979.
8.
VasconcelosH. F.Structural optimization of an impact forming machine by finite elements. PhD thesis, Department of Mechanical Engineering, The University of Birmingham, July 1979.
9.
KarkS. K.Dynamic analysis of machine tool structures by the finite element method. PhD thesis, UMIST, Manchester, Oct. 1974.
10.
TauchertT. R.Energy principles in structural mechanics, McGraw-Hill, New York, 1974.
11.
FoxR. L.Optimization methods for engineering design, Addison-Wesley, 1971.
12.
GillP. E.MurrayW.PittfieldR. A.The implementation of two revised quasi-Newton algorithms for unconstrained optimization. NPL, Report NAC 11, April 1972.
