Using orthogonal (plane strain) machining theory together with certain simplifying assumptions based on experimental observations it is shown how the three components of cutting force in oblique machining can be predicted from a knowledge of the work material flow stress and thermal properties and the cutting conditions. A comparison of predicted and experimental cutting force results is given.
Get full access to this article
View all access options for this article.
References
1.
HastingsW. F.MathewP.OxleyP. L. B.A machining theory for predicting chip geometry, cutting forces etc. from work material properties and cutting conditions. Proc. R. Soc., 1980, A371, 569–587.
2.
ArmaregoE. J. A.BrownR. H.The machining of metals, Prentice-Hall Inc., Englewood Cliffs, N.J., 1969.
3.
KoenigsbergerF.Design principles of metal-cutting machine tools, Pergamon Press, 1964.
4.
KronenbergM.Machining science and application, Pergamon Press, 1966.
5.
LinG. C. I.OxleyP. L. B.Mechanics of oblique machining: Predicting chip geometry and cutting forces from work material properties and cutting conditions, Proc. Instn Mech. Engrs, 1972, 186, 813–820.
6.
LinG. C. I.Prediction of cutting forces and chip geometry in oblique machining from flow stress properties and cutting conditions. Int. J. Mach. Tool Des. Res., 1978, 18, 117–130.
7.
FentonR. G.OxleyP. L. B.Mechanics of orthogonal machining: Allowing for the effects of strain-rate and temperature on tool-chip friction. Proc. Instn mech. Engrs, 1968–69, 182, Pt 1, 417–438.
8.
UsuiE.HirotaA.MasukoM.Analytical prediction of three dimensional cutting process part 1 basic cutting model and energy approach. J. Engng. Ind., Trans. Am Soc. mech. Engrs, 1978, 100, 222–228.
9.
UsuiE.HirotaA.Analytical prediction of three dimensional cutting process part 2 chip formation and cutting force with conventional single-point tool. J. Engng. Ind., Trans. Am Soc. mech. Engrs, 1978, 100, 229–235.
10.
UsuiE.ShirakashiT.KitagawaT.Analytical prediction of three dimensional cutting process part 3 cutting temperature and crater wear of carbide tool. J. Engng. Ind., Trans. Am Soc. mech. Engrs, 1978, 100, 236–243.
11.
StevensonM. G.OxleyP. L. B.An experimental investigation of the influence of speed and scale on the strain-rate in a zone of intense plastic deformation. Proc. Instn mech. Engrs, 1969–70, 184, Pt 1, 561–576.
12.
BoothroydG.Temperatures in orthogonal metal cutting. Proc. Instn mech. Engrs, 1963, 177, 789–802.
13.
MathewP.OxleyP. L. B.Allowing for the influence of strain-hardening in determining the frictional conditions at the tool/chip interface in machining. Wear, 1981, 69, 219234.
14.
OxleyP. L. B.HastingsW. F.Predicting the strain rate in the zone of intense shear in which the chip is formed in machining from dynamic flow stress properties of the work material and cutting conditions. Proc. R. Soc., 1977, A356, 395–410.
15.
OxleyP. L. B.HastingsW. F.Minimum work as a possible criterion for determining the frictional conditions at the tool/chip interface in machining. Phil. Trans. R. Soc., 1976, A282, 565–584.
16.
OyaneM.TakashimaF.OsakadaK.TanakaH.The behaviour of some steels under dynamic compression. 10th Japan congress on testing materials, 1967, 72.
17.
WoolmanJ.MottramR. A.The mechanical and physical properties of the British En steels, British Iron and Steel Research Association, Pergamon Press, Oxford, 1964.
18.
StablerG. V.The fundamental geometry of cutting tools. Proc. Instn mech. Engrs, 1951, 165, 14–21.
