Abstract
The use of aluminium alloy instead of steel for the structural components of a 32 ton articulated lorry has been examined. The probable manufacturing difficulties have been assessed and shown to be minimal. The savings in weight possible by using aluminium have been calculated from a structural analysis of the cab, tractor chassis and trailer and from this and an assessment of the manufacturing processes the extra cost of manufacturing in aluminium has been determined. A typical case study shows that this extra cost can be easily recovered by utilising the increased load capacity of the vehicle during the first few years of its life.
Get full access to this article
View all access options for this article.
References
1.
Glaser
K.F.
Johnson
G.E.
1974 SAE Paper 740075.
2.
Adams
D.G.
1975 SAE Paper 750222.
3.
Keeler
S.P.
1965 SAE Paper 650535.
4.
Goodwin
G.M.
1968 SAE Paper 680093.
5.
Wecker
S.S.
1972 Proc. 7th IDDRG Biennial Congress, Amsterdam.
6.
Wardill
G.A.
Cranfield Structural Programme COIL.
7.
Doo
D.W.H.
Msc Thesis 1972 , Cranfield Institute of Technology.