A comprehensive experimental study of the distortion and resonance in adapters is made on a special test rig and on combustion engines. A theoretical treatment of the phenomenon is made, using simple simulation models and the method of characteristics.
Get full access to this article
View all access options for this article.
References
1.
WithersJ.G.: Effects of indicator passages on the accuracy of indicator diagrams. The Engineer, December 16, 1955.
BrownW.L.: Methods for evaluating requirements and errors in cylinder pressure measurements. SAE Paper 670.008.
4.
TeradaKruggel O,: Die Messung schnellveränderlicher Drücke in Verbrennungskraftmaschinen. Teil II — Untersuchungen, der Eigenschaften elektrischer Druckaufnehmer unter statischer Belastung. D.F.L. Bericht nr 194.
5.
Van AkenCh.: De invloed van de temperatuur op elektronische drukopnemers. Het Ingenieursblad1968, nr 1, pag. 28.
6.
BenderskyD.: A thermocouple for measuring transient temperature. Mechanical EngineeringVol. 75, nr 2, February 1953, pag. 117.
7.
NagaoF.ShimamotoY.NaganoH.UenoY.: Influence of the connecting passage of a low-pressure indicator on recording. Bulletin of JSME, nr 21, 1963.
8.
NagaoF., Ikegama: Errors of indicator due to a connecting passage. JSME nr 29, 1965.
9.
BensonR.GargR.WoollattD.: A numerical solution of unsteady flow problems. Int. J. Mech. Sci., 1964, Vol 6, pag. 117.
10.
Van AkenCh.: Adapterfouten in indikatordiagrammen van verbrandingsmotoren. Doctoraatsthesis RUG 1972.
