Experimental and Theoretical Performance of a Radial Flow Turbocharger Compressor with Inlet Prewhirl

Shouman A. R. Anderson J. R. ‘The use of compressor-inlet prewhirl for the control of small gas turbines.’ Trans. ASME. J. of Eng. for Power, April 1964, P. 136.

Rodgers C. ‘Variable geometry gas turbine radial compressors.’ ASME Paper No. 68-GT-63.

Wilde G. L. Allen F. J. ‘Supercharging the 1 1/2-litre V16 BRM racing engine.’ Proc. I.Mech.E. 1964–65, Vol. 179 pt 2A No. 1, P.45.

Kemlin S. ‘Turbocharger line covers 150–500 HP Engine Range.’ Diesel and Gas Turbine Progress, Jan-Feb 1969, P.32.

Wallace F. J. ‘Theoretical assessment of the performance characteristics of inward radial flow turbines.’ Proc. I.Mech.E. 1958, P.931.

Wallace F. J. Cave P. R. Miles J. ‘Preformance of inward radial flow turbines under steady flow conditions with special reference to high pressure ratio and partial admission.’ Proc. I.Mech.E., Vol. 184, Pt 1. 1969–70.

Wallace F. J. Whitfield A. ‘A new approach to the problem of predicting the performance of centrifugal compressors.’ 2nd Int JSME Symposium, Tokyo, 1972.

Whitfield A. Wallace F. J. ‘Performance prediction for automotive turbocharger compressors.’ To be published.

Whitfield A. Wallace F. J. ‘Study of incidence loss models in radial and mixed flow turbomachinery.’ I.Mech.E. Conference, Publication 3, Paper No. C55/73, 1973.

Wallace F. J. Cave P. R. ‘Matching of high output Diesel engines with associated turbomachinery.’ Proc. I.Mech.E. Vol. 187 48/73. 1973.

Wallace F. J. Sivakumaran K. ‘Matching of high output turbocharged engines for maximum torque back up and emission reduction based on the use of variable geometry compressors and turbines.’ Society of Automotive Engineers. National Combined Farm, Construction and Industrial Machinery and Powerplant Meetings. Sept. 9–12. 1974. Milwaukee. WJS. U.S.A.

Stanitz J. D. ‘Design considerations for mixed-flow centrifugal compressors with high flow rates per unit frontal area.’ NACA. RME 53A15, 1953.

Coppage J. E. Dallenbach F. et. al. ‘Study of supersonic radial compressors for refrigeration and pressurization systems.’ WADC Tech Report 55–257. December 1956.

Jansen W. ‘A method for calculating the flow in a centrifugal impeller when entropy gradients are present.’ I.Mech. E. Internal Aerodynamics (Turbomachinery) 1970.

Johnston J. P. Dean R. C. ‘Losses in vaneless diffusers of centrifugal compressors and pumps.’ Trans. ASME. series A. Jan. 1966.

Whitfield A. ‘The slip factor of a centrifugal compressor and its variation with flow rate.’ Proc. I.Mech.E.