Peak heat fluxes which occur near the oil burner can be predicted by a simple mathematical model to within 12 per cent and thus help to estimate peak metal temperatures. Although peaks of 150 000 Btu/ft2 h can occur in current practice, the metal of the furnace is not at risk provided the waterside is clean. Conversely, the risk is great when even a small amount of scale has built up.
Get full access to this article
View all access options for this article.
References
1.
GoreW. H.GunnD. C.HorslerA. G. Inst. Fuel National Meeting March 15 1972. Aston University.
2.
HoggarthM. L.PomfretK. F.SpittleP.‘Evaluation of dual fuel burner performance.’The Gas Council, Research Communication G.C.196.
3.
LuningO. E.MulderL. L.VermeulenN. P. J.1953‘Research made into the temperatures occurring in a Cornish boiler.’ Information Report No. 29. Inst, voor Warmt-Economie (T.N.O.)Delft, Netherlands.
4.
Dienst Voor Het Stoomwezen: 1970 Doc. A.B.G. 28 (2) Den Haag: Netherlands.
5.
T.U.V. Va T.U.V. Merkblatt Dampfkessel Richtlinien für die Beurteiling von Kesselkonstruktionen. Dampfkessel 451–71/1 p. 13 Aug. 1971.
6.
Boiler Rating Criteria for Non-Residential Boilers: 1962 Report No. 44 Publication 981: National Academy of Sciences: National Research Council, Washington D.C.
7.
Hamworthy Engineering Limited, Poole, Dorset.
8.
WuH. L.‘Comparison of the performance of natural gas and oil flames in a cylindrical furnace. J. Inst. Fuel1969 (Aug) 42, 417.
9.
McAdamsW. H.Heat transmission3rd Edition, Equation 9–17, 227. McGraw-Hill, New York.
10.
Ibid. Equation 9–16, 226.
11.
Ibid. Equation 4–65, 100.
12.
WrightS.J. Inst. Fuel196538, 124.
13.
International Flame Research Foundation A Digest of the NG-3 Trials Doc. G33/a/6, 1971.
14.
B.S.S. 2790 Part 1 1969 Shell Boilers of Welded Construction 2.2.2.
15.
B.S.S. 2486 Treatment of Water for Land Boilers (under revision) British Standards Institution, London.
16.
Water Treatment for Shell Boilers. Association of Shell Boilermakers, Manchester.
