Stress-Strain Characteristics of Various Steels over a Wide Range of Strain-Rates and Temperatures

Abstract

Compression tests are described to determine the flow stresses of steel of specifications: En 1A, En 8, En 26, En 30B, En 58 and 6:5:2 and 18:4:1 high-speed steels, which are presented for use in the analysis of metal working operations. Testing temperatures of 600°C, 800°C, 1000°C and 1200°C were employed and using each of two high-speed hammers and a mechanical press, strain-rates ranging from approximately 12/s to 2500/s were obtained.

Get full access to this article

View all access options for this article.

References

Cole

B. N.

Davies

Austin

E. R.

Bakhtar

‘High-speed impact extrusion of metals’, Proc. Instn mech. Engrs 1965–66 180 (Pt 1), 191–216.

Austin

E. R.

Davies

Bakhtar

‘High-speed impact forming of metals’, Proc. Instn mech. Engrs 1967–68 182 (Pt 1), 175–202.

Jones

M. G.

Davies

Singh

‘Some high-speed cold forming operations’, Proc. 9th Int. M.T.D.R. Conf. 1968, 149–62.

Davies

Singh

‘The production of components by cold extrusion using high-energy rate techniques’, Proc. 11th Int. M.T.D.R. Conf. 1970, 705–28.

Dower

R. J.

‘The high-speed extrusion of some common metals’, N.E.L. Rep. No. 188.

Glanville-Jones

‘Progress in high-energy-rate forging’, J. Inst. Metals 1969 97, 257–70.

‘Elevated temperature extrusion of steels. Part 1. Backward Extrusion’, P.E.R.A. Rep. No. 130.

‘Elevated temperature extrusion of steels, extended tests on lubrication (backward extrusion)’, P.E.R.A. Rep. No. 138.

‘Elevated temperature extrusion of steels. Part 2. Forward extrusion’, P.E.R.A. Rep. No. 147.

10.

‘Elevated temperature extrusion. Preliminary investigation into tool life under production conditions’, P.E.R.A. Rep. No. 169.

11.

Cruden

A. K.

Thomson

J. F.

‘Extrusion pressures, press loads and tool stresses for the warm extrusion of steels’, N.E.L. Rep. No. 456.

12.

Dean

T. A.

‘A preliminary warm forging essay’, Proc. 11th Int. M.T.D.R. Conf. 1970, 779–801.

13.

Nadai

Manjoine

M. J.

‘High-speed tension tests at elevated temperatures—Parts II and IIP, J. appl. Mech. 1941 8, A77–A91.

14.

Cook

P. M.

‘True stress-strain curves for steel in compression at high temperatures and strain-rates for application to the calculation of load and torque in hot rolling’, Proc. Conf. on the Properties of Materials at High Rates of Strain 1957, 86–97 (Institution of Mechanical Engineers, London).

15.

Baraya

G. L.

Johnson

Slater

R. A. C.

‘The dynamic compression of circular cylinders of super pure aluminium at elevated temperatures’, Int. J. mech. Sci. 1965 7, 621–45.

16.

Samanta

S. K.

‘Resistance to dynamic compression of low-carbon steel and alloy steels at elevated temperatures and at high strain-rates’, Int. J. mech. Sci. 1968 10, 613–36.

17.

Suzuki

Hashizume

Yabuki

Ichihara

Nakajima

Kenmochi

‘Studies on the flow stress of metals and alloys’, Rep. Inst. Ind. Sci. Tokvo 1968 18 (No. 3).

18.

Chan

L. T.

Bakhtar

Tobias

S. A.

‘A survey of the development of the Petro-Forge system’, C.I.R.P. Conf., Ann Arbor 1967.

19.

Sturgess

C. E. N.

Dean

T. A.

‘Dynamic effects in high velocity compression testing’, Proc. 13th M.T.D.R. Conf. 1972.

20.

Vinycombe

R. K.

Martyr

F. E.

‘Design of capacitance displacement transducers’, Instrument Practice 1956 10, 437–9.

21.

Male

A. T.

Cockroft

M. G.

‘A method for the determination of the coefficient of friction under conditions of bulk plastic deformation’, J. Inst. Metals 1964–65 93, 38.

22.

Pugh

H. Ll. D.

Watkins

M. T.

‘Some strain-rate effects in drop forging tests’, Proc. Conf. on the Properties of Materials at High Rates of Strain 1957, 122–7 (Institution of Mechanical Engineers, London).

23.

Sturgess

C. E. N.

Bramley

A. N.

‘The use of impact forming devices to obtain dynamic stress-strain data’, Proc. 11th M.T.D.R. Conf. 1970, 803–26.

24.

Hawkyard

J. B.

Johnson

‘An analysis of the changes in geometry of a short hollow cylinder during axial compression’, Int. J. mech. Sci. 1967 9, 163.

25.

Sheikh

A. D.

Dean

T. A.

Tobias

S. A.

Das

M. K.

‘The effect of impact speed and lubricant in hot forging. Part 1. Interface friction and die cavity pressure’, Proc. 13th M.T.D.R. Conf. 1972.

26.

Schroeder

Webster

D. A.

‘Press forging thin sections, effect of friction area and thickness on pressures required’, J. appl. Mech. 1949 16, 289.

27.

Jain

S. C.

Bramley

A. N.

‘Speed and frictional effects in hot forging’, Proc. Instn mech. Engrs 1967–68 182 (Pt 11, 783–98.