A survey is given of progress in the development of self-lubricating materials for load-carrying components (bearings and gears) or for transfer lubrication (rolling element bearing retainers). Various methods for producing composites of inorganic solid lubricants, metals, polymers, carbons and ceramics are briefly described, and some suggestions for further work are included.
Get full access to this article
View all access options for this article.
References
1.
RoachA. E.GoodzeitC. L.HunnicuttR. P. ‘Scoring characteristics of thirty-eight different elemental metals on high speed sliding contact with steel’, Trans. Am. Soc. mech. Engrs195678, 1669.
2.
CoffinL. F. ‘A study of the sliding of metals, with particular reference to atmosphere’, Lubric. Engng195612, 50.
3.
MachlinE. S.YankeeW. R. ‘Friction of clean metals and oxides with special reference to titanium’, J. appl. Phys.196425, 576.
4.
SikorskiM. E. ‘The adhesion of metals and the factors that influence it’, Wear19647, 144.
5.
HirstW. ‘Wear of unlubricated metals’, Proc. Conf. Lubric. Wear, London1957, 674 (Instn Mech. Engrs, London).
6.
KrushchovM. N.BabichevN. A. ‘Resistance to abrasive wear and hardness of metals’, Dokl. Akad Nauk SSSR195388 (3), 445. (Trans. NSF-tr-15, 1953.).
7.
LancasterJ. K. ‘Wear of carbon and graphitic materials sliding against rough metal surfaces’, Proc. Lubric. Wear Corvo. 1963, 190 (Instn Mech. Engrs, London).
8.
OberleT. L. ‘Properties influencing wear of metals’, J. Metals19513, 438.
9.
DrescherH. ‘Mechanism of friction between solids’, VDI Z.1959101 (17), 697. (A. E. I. Trans. T/1793, 1962.).
10.
WhiteheadJ. R. ‘Surface deformation and friction at light loads’, Proc. R. Soc.1950A201, 109.
11.
WilsonR. ‘The contact resistance and mechanical properties of surface films on metals’, Proc. Phys. Soc. B.195568, 625.
12.
BuckleyD. H.JohnsonR. L.SwikertM. A. ‘Studies of lubricating materials in vacuum’, Proc. USAF-SWRI Aerospace Bearing Conference1964, 60.
HumenickM.HallD. W.Van AlstenD. W. ‘A new family of metal graphites handles many bearing jobs’, Iron Age1960186, 171.
15.
BoesD. J. ‘New solid lubricants; preparation, properties and potentials’, A. S. L. E. Preprint 65-AM-5C3.
16.
MagieP. M. ‘A review of the properties and potentials of the new heavy metal derivative solid lubricants’, Lubric. Engng196622, 262.
17.
PetersonM. B.JohnsonR. L. ‘Friction of possible solid lubricants with various crystal structures’, Tech. Notes natn. advis. Comm. Aeronaut. Wash. 1954 No. 3334.
18.
BowdenF. P. ‘Frictional properties of sintered metals containing MoS2’, Research, Lond.19503, 384.
19.
CampbellM. E.Van WykJ. W. ‘Development and evaluation of lubricant composite materials’, Lubric. Engng196420, 463.
20.
DevineE. J. ‘Rolling element slip rings for vacuum applications’, NASA tech. Note D-2261, 1964.
21.
ManningB. ‘Bearing lubricant materials for aerospace applications’, Proc. USAF-SWRI Aerospace Bearing Conference1964, 124.
22.
SlineyH. E. ‘Self-lubricating composites of porous nickel and nickel-chromium alloy impregnated with barium fluoride-calcium fluoride eutectic’, NASA tech. Note D-3484, 1966.
23.
BowenP. H.BoesD. J.McDowellJ. R. ‘Wear and friction characteristics of self-lubricating composite materials’, Mach. Des. 1963, 139.
24.
BoesD. J.BowenP. H. ‘Friction-wear characteristics of self-lubricating composites developed for vacuum service’, ASLE Trans.19636, 192.
25.
Bemol Inc. ‘Self-lubricating alloys’. Development Rep. No. 208, 1966.
26.
Anon. ‘Composite materials are self-lubricating’, Mater. Engng196664 (2), 25.
27.
MoberlyL. E.JohnsonJ. L. ‘Electrical sliding contacts for application in space environments’, I. E. E. E. Trans. Aerospace1965AS-3, 252.
28.
BuckleyD. H.JohnsonR. L. ‘The influence of microstructural inclusions on friction and wear of nickel and iron in vacuum to 10–9 mm of mercury’, NASA tech. Note D-1708, 1963.
29.
Morganite Research and Development Ltd ‘Morganite 553 bearings for use at red heat’, New Products Data Sheet (London).
30.
Imperial Chemical Industries Ltd ‘The Cassel Sulfinuz process’, DTD.900/4497.
31.
MaassenG. ‘On the use of sulphur-soaked sintered iron as a bearing material’, Stahl Eisen196373 (4), 219. (A. E. I. Trans. T/667, November 1963.).
32.
MaddockR.LancasterJ. K. ‘Electrical contacts in motor uniselector switches’, A. E. I. Research Report H.763, 1963.
33.
Glacier Metal Co. Ltd ‘Dry bearings and materials’, Designers Handbook No. 2 (Wembley).
34.
MitchellD. C. ‘The wear of p. t. f. e. impregnated metal bearing materials’, Proc. Conf. Lubric. Wear1957, 396 (Instn Mech. Engrs, London).
DevineM. J.KrollA. E. ‘Aromatic polyimide compositions for solid lubrication’, A. S. L. E. Preprint 64-AM-1B4.
37.
JaegerJ. C. ‘Moving sources of heat and the temperature at sliding contacts’, Proc. R. Soc. N. S. W.194376, 203.
38.
EarpF. K.HillM. V. ‘Oxidation of carbon and graphite’, Conf. Ind. Carbon Graphite, London1957, 326.
39.
SavageR. H. ‘Graphite lubrication’, J. appl. Phys.194819, 1.
40.
MitchellD. C.PrattG. ‘Friction, wear and physical properties of some filled p. t. f. e. bearing materials’, Proc. Conf. Lubric. Wear1957, 416 (Instn Mech. Engrs, London).
41.
SpeerschneiderC. T.LiC. H. ‘The role of filler geometrical shape in the wear and friction of filled p. t. f. e.’, Wear19625, 392.
42.
Imperial Chemical Industries Ltd ‘The Fluon V range of filled p. t. f. e.’, Special Note 4 (Welwyn Garden City).
43.
WhiteH. S. ‘Small oil-free bearings’, J. Res. natn Bur. Stand.195657, 185.
44.
WisanderD. W.JohnsonR. L. ‘A solid film lubricant composition for use at high sliding velocities in liquid nitrogen’, ASLE Trans.19613, 255.
45.
WisanderD. W.MaleyC. E.JohnsonR. L. ‘Wear and friction of filled p. t. f. e. compositions in liquid nitrogen’, ASLE Trans.19592, 58.
46.
GillespieL. H.SaxtonD. O.ChapmanF. M. ‘New design data for t. f. e. and f. e. p.’, Mach. Des. 1960 (Jan. 21), 126; (Feb. 18) 156.
47.
SteinbruchR. T. ‘Nylon 6 as a bearing material’, Wear19625, 458.
48.
MitchellD. C.FulfordB. B. ‘Wear of selected molybdenum disulphide lubricated solids and surface films’, Proc. Conf. Lubric. Wear1957, 376 (Instn Mech. Engrs, London),.
McCulloughH. ‘Vitro background and capabilities in materials’ (Vitro Corporation of America, N. J.).
56.
BlochE. A. ‘Dispersion-strengthened aluminium alloys’, Metall. Rev.19616, 193.
57.
RollinsF. R. ‘Use of graphite whiskers in a study of the atmosphere dependence of graphite friction’, J. appl. Phys.196122, 1454.
58.
ZemanK. P.CoffinL. F. ‘Friction and wear of refractory compounds’, ASLE Trans.19614, 191.
59.
SibleyL. B.AllenC. M. ‘Friction and wear behaviour of refractory materials at high sliding velocities and temperatures’, A. S. M. E. Preprint 61-LUBS-16, 1961.
60.
BrownR. D.BurtonR. A.KuP. M. ‘Friction and wear characteristics of cermets at high temperature and high vacuum’, ASLE Trans.19625, 24.
61.
AmateauM. F.GlaeserW. A. ‘A survey of materials for high temperature bearing and sliding applications’, Wear19647, 385.
62.
TaylorK. M.SibleyL. B.LawrenceJ. C. ‘Development of a ceramic rolling contact bearing for high temperature use’, Wear19636, 227.
63.
MerrimanE. B. ‘Self-lubricating bearing’, U. S. Patent 2 187 626, 1940.
64.
HallerJ. ‘Self-lubricating machine element’, U. S. Patent 2 752 211, 1956.
65.
ProctorJ. A. ‘Lubricating device’, U. S. Patent 2 852 097, 1958.
66.
BowenP. H. ‘Solid lubrication of gears and bearings in a space environment’, ASLE Trans.19647, 227.
67.
WilliamsA. G.RidingsT. L. ‘Operational evaluation of dry lubricant composites in a high vacuum chamber’, AEDC-TDR-63–67, 1963.
68.
LancasterJ. K. ‘Lubrication by transferred films of solid lubricants’, ASLE Trans.19658, 146.
69.
DevineM. J.LamsonE. R.BowenJ. H. ‘Friction bearing design considerations for solid lubrication’, A. S. M. E. Preprint 63-MD-43.
70.
FairweatherA.LazenbyF.ParkerA. E. ‘Long-life, low voltage contacts’, Proc. Instn elect. Engrs1962109B (Supp. 22), 567.
71.
CalhounS. F.MeadeF. S.MurphyG. P.YoungR. L. ‘Factors affecting the performance of resin-bonded solid film lubricants’, Lubric. Engng196521, 97.
72.
‘Improvements in or relating to white metal elements and methods for the production thereof’, Brit. Pat. 687 576, 1953.
73.
‘Improved dry lubricants for highly polished metal surfaces’, Engng Dig.195920, 475.
