Some Design Problems Arising in the Development of Very Large High-Speed Turbines

Rabotnov Yu. N. Rabinovich V. P. ‘On the strength of turbine discs under conditions of creep’, Izv. AN SSSR, OTN, Mekhanika i Mashinostroenie 1959 (No. 4), 93. (C.E.G.B. translation No. 2235.).

Robinson E. L. ‘Effect of temperature variation on the long-time rupture strength of steels’. Trans. Amer. Soc. mech. Engrs 1952 74, 777.

Dollin F. The Nineteenth Parsons Memorial Lecture. ‘Factors influencing the continuing development of the steam turbine’, Proc. Instn mech. Engrs, Lond. 1955 169, 59.

Gardner F. W. ‘Erosion of steam turbine blades’, Engineer, Lond. 1932 153, 146, 174, 202.

Robinson E. L. ‘Bursting tests of steam-turbine disk wheels’, Trans. Amer. Soc. mech. Engrs 1944 66, 373.

Waldren N. E. Ward D. E. The experimental correlation of rotating disc bursting strength with conventional material test data, N.G.T.E. Report M349, May 1961.

Winne D. H. Wundt B. M. ‘Application of Griffith-Irwin theory of crack propagation to bursting behavior of disks’, Trans. Amer. Soc. mech. Engrs 1958 80, 1643.

Hagg A. C. Sankey G. O. ‘Elastic and damping properties of oil-film journal bearings for application to unbalance vibration calculations’, J. appl. Mech., Trans. Amer. Soc. mech. Engrs 1958 25, 141.

Whitney E. C. Criner H. E. ‘Determination of short-circuit torques in turbine generators by test’, Trans. Amer. Inst. elect. Engrs 1940 59, 885.

Dransfield F. Gray J. L. ‘Land practice in modern steam plant’, Trans. Inst. Mar. Engrs 1962 74, 141.

Bailey R. W. ‘The utilization of creep test data in engineering design’ (Appendix VII), Proc. Instn mech. Engrs, Lond. 1935 131, 260.

Odqvist F. K. G. Contribution to discussion on 20, 341.

Wahl A. M. ‘Stress distributions in rotating disks subjected to creep at elevated temperature’, J. appl. Mech., Trans. Amer. Soc. mech. Engrs 1957 79, 299.

Traupel W. Thermische Turbomaschinen Vol. 2. Regelverhalten, Festigkeit und dynamische Probleme 1960 (Springer-Verlag, Berlin).

Johnson A. E. ‘Turbine discs for jet propulsion units’, Aircr. Engng 1956 28, 187, 235, 265, 325, 348.

Amel'yanchik A. V. ‘Calculation of the strength of turbine discs using a computor’, Mekhanika i Mashinostroenie 1959 (no. 1), 138 (C.E. Trans. no. 2263).

Mendelson A. Hirschberg M. H. Manson S. S. ‘A general approach to the practical solution of creep problems’, J. basic Engng, Trans. Amer. Soc. mech. Engrs 1959 81, 585.

Capriz G. ‘A numerical approach to some problems of continuum mechanics and related questions of stability’, Symposium at the Provisional International Computation Centre, 1960, 510 (Birkhäuser Verlag, Basel).

Johnson A. E. ‘Complex-stress creep of metals’, Metallurg. Rev. 1950 5, 447.

Bailey R. W. ‘The utilization of creep test data in engineering design’, Proc. Instn mech. Engrs, Lond. 1935 131, 131.

Wahl A. M. ‘A comparative study of elevated temperature creep in long rotating cylinders based on various flow criteria’, Proceedings of the Third U.S. National Congress of Applied Mechanics 1958, 685 (American Society of Mechanical Engineers, New York).

Pearson D. Steady creep of a long hollow rotating cylinder Central Electricity Research Laboratories Note No. RD/L/N81/61.