Actuator Disc Theory of the Incompressible Flow in Axial Compressors

Cohen H. White E. M. 1943 A.R.C. Rep. 6842, ‘The theoretical determination of the three dimensional flow in an axial compressor, with special reference to constant reaction blading’.

Bowen J. T. Sabersky R. H. Rannie W. D. 1951 Trans. Amer. Soc. mech. Engrs, vol. 73, p. 1, ‘Investigations of axial-flow compressors’.

Ruden P. 1944 Tech. Memor. Nat. adv. Comm. Aero., Wash., 1062, ‘Investigation of single-stage axial flow fans’.

Merchant W. Hansford J. T. Harrison P. M. 1946 Metropolitan-Vickers internal rep. (Unpublished), ‘The flow of an ideal fluid in an annulus’.

Marble F. E. 1948 J. aero. Sci., vol. 15, ‘The flow of a perfect fluid through an axial turbomachine with prescribed blade loading’.

Railly J. W. 1951 Aeronaut. Quart., vol. 3, p. 133, Pt. 2, ‘Flow of Incompressible Fluid through an Axial Turbo-machine with any Number of Rows’.

Wu C. H. 1951 Tech. memor. No. 2302 Nat. Adv. Comm. Aero., Wash., ‘General throughflow theory of fluid flow with subsonic or supersonic velocity in turbomachines of arbitrary hub and casing shapes’.

Lamb H. 1936 ‘Hydrodynamics’ (Cambridge University Press, London).

Bragg S. L. Hawthorne W. R. 1950 J. aero. Sci., vol. 17, p. 243, ‘Some exact solutions of the flow through annular cascade actuator discs’.

Hawthorne W. R. 1954 ‘An exact solution to the flow through two actuator discs’ (Unpublished).

Rhoden H. G. 1952 A.R.C. Rep. 15259, ‘Effects of Reynolds number on the flow of air through a cascade of compressor blades’.

Horlock J. H. Deverson E. C. 1959 A.R.C. C.P. 426, ‘An experiment to determine the position of an equivalent actuator disc replacing a blade row of a turbo-machine’.

Howell A. R. 1942 Rep. and mem. A.R.C. 2095, ‘The present basis of axial flow compressor design: Part I—Cascade theory and performance’.

Horlock J. H. 1957 C.P. 321, A.R.C. ‘Instrumentation used in measurement of the three-dimensional flow in an axial flow compressor’.

Horlock J. H. 1955 Rep. and mem. A.R.C. 3031, ‘Experimental and theoretical investigations of the flow of air through two single-stage compressors’.

Mellor G. L. 1961 Amer. Soc. mech. Engrs Paper No. 61-WA-186, ‘Reconsideration of the annulus flow problem in axial turbomachinery’.

Wu C. G. Wolfenstein L. 1950 Report No. 955 Nat. Adv. Comm. Aero., Wash., ‘Application of radial-equilibrium condition to axial-flow compressor and turbine design’.

Smith L. H. Traugott S. C. Wislicenus G. F. 1953 Trans. Amer. Soc. mech. Engrs, vol. 75, ‘A practical solution of a three-dimensional flow problem of axial-flow turbomachinery’.

Yeh H. 1959 J. Aero Sci., vol. 26, ‘An actuator disc analysis of inlet distortion and rotating stall in axial-flow turbomachines’.