The Twenty-Eighth Thomas Lowe Gray Lecture: Marine Reduction Gearing

Baker L. Falconer W. H. 1955 Trans. Inst. Mar. Eng., Vol. 67, p. 1, ‘Some Operating Experience at 950° F.’.

Brown T. W. F. 1950 Trans. North East Coast Inst. Eng. and Shipbuilders, Vol. 66, p. 315, ‘Geared Steam Turbines for Merchant Ship Propulsion’.

1954 Proc. I. Mech. E., Vol. 168, p. 19, Thomas Lowe Gray Lecture, ‘High-temperature Turbine Machinery for Marine Propulsion’.

Davis A. W. 1941 Fairfield Shipbuilding and Engineering Co., Ltd., Report, ‘Loading on Gear Teeth’.

1945 Trans. Inst. Eng. and Shipbuilders in Scotland, Vol. 88, p. 179, ‘Current Practice in Marine Gear-cutting’.

1949 Trans. Inst. Mar. Eng., Vol. 61, p. 89, ‘Trends in the Development of Marine Reduction Gearing’.

Dorey S. F. 1942 Trans. Inst. Mar. Eng., Vol. 54, p. 111, ‘Sir Charles Parsons and Mechanical Gearing’.

Douglas L. M. 1940–41 Trans. North East Coast Inst. Eng. and Shipbuilders, Vol. 57, p. 67, ‘Mechanical Gearing for Large Power Transmission’.

Dyson J. 1955 Engineering, Vol. 179, p. 274, ‘Examining of Machined Surfaces by Interferometry’.

Joughin J. H. 1951 Proc. I. Mech. E., Vol. 164, p. 157, ‘Naval Gearing—War Experience and Present Development’.

McCance Andrew. 1951–52 Trans. Inst. Eng. and Shipbuilders in Scotland, Vol. 95, p. 1, ‘Presidential Address’.

Martin H. M. 1916 Engineering, Vol. 102, p. 119, ‘Lubrication of Gear Teeth’.

Merritt H. E. 1954 ‘Gears’, 3rd edition (Sir Isaac Pitman and Sons, Ltd., London).

Newman A. D. 1956 Trans. North East Coast Inst. Eng. and Shipbuilders, ‘Bearings for Marine Geared Turbines’.

Niemann G. 1949 D. S. I. R. Sponsored Research (Germany), Report No. 3, ‘The Deformation of Loaded Gears, and the Effect on Their Load Carrying Capacity’.

Phillips D. G. 1955 Trans. Inst. Mar. Eng., Vol. 67, p. 187, ‘U. S. S. Timmerman—An Advanced Design Destroyer’.

Rogerson J. 1955 Trans. Inst. Mar. Eng., Vol. 67, p. 271, ‘Some Observations on Marine Gearing’.

Shawki G. S. A. 1955 Engineering, Vol. 179, p. 243, ‘Whirling of a Journal Bearing’.

Timoshenko S. Baud R. V. 1926 Mechanical Engineering, Vol. 48, No. 11, p. 1105, ‘The Strength of Gear Teeth’.

Walker H. 1946 The Engineer, Vol. 182, p. 24, ‘Helical Gears’.

Yates H. G. 1955 Proc. I. Mech. E., Vol. 169, No. 34, ‘Prediction and Measurement of Vibration in Marine Geared-shaft Systems’.