BlandD. R.1948 British Iron and Steel Research Association Report No. MW/A/3/48.
2.
BlandD. R.FordH.1948Proc. I.Mech.E., vol. 159, p. 144, ‘The Calculation of Roll Force and Torque in Cold Strip Rolling with Tensions’.
3.
1952Jl. Iron and Steel Inst., vol. 171, p. 245, ‘An Approximate Treatment of the Elastic Compression of the Strip in Cold Rolling’.
4.
BlandD. R.SimsR. B.1953Proc. I.Mech.E., vol. 167, p. 371, ‘A Note on the Theory of Rolling with Tensions’.
5.
BowdenF. P.TaborD.1950‘The Friction and Lubrication of Solids’ (Oxford Clarendon Press).
6.
FordH.1948Proc. I.Mech.E., vol. 159, p. 115, ‘Researches into the Deformation of Metals by Cold Rolling’.
7.
FordH.EllisF.1952Jl. Iron and Steel Inst., vol. 171, p. 239, ‘Comparison of Calculated and Experimental Results’.
8.
HessenbergW. C. F.SimsR. B.1951Jl. Iron and Steel Inst., vol. 168, p. 155, ‘The Effect of Tension on Torque and Roll Force in Cold Strip Rolling’.
9.
HillR.1950Proc. I.Mech.E., vol. 163, p. 135, ‘Relations Between Roll-force, Torque, and the Applied Tensions in Strip-rolling’.
10.
HoffE. A. W.1947Jl. Iron and Steel Inst., vol. 155, p. 51.
11.
OrowanE.Los1950 See Underwood, ‘The Rolling of Metals’, p. 154 (Chapman and Hall, London).
12.
RankineJ.BaileyW.StantonF. P.1948Jl. Iron and Steel Inst., vol. 160, p. 381, ‘Resistance Strain Gauges for the Measurement of Roll Force, Torque, and Strip Tension’.
13.
SiebelE.PompA.1927Mitt. K.W.I. Eisenf., vol. 9, p. 157.
14.
1928Mitt. K.W.I. Eisenf., vol. 10, p. 55.
15.
WattsA. B.FordH.1952–53Proc. I.Mech.E. (B), vol. IB, p. 448, ‘An Experimental Investigation of the Yielding of Strip Between Smooth Dies’.
