Engineering Steels under Combined Cyclic and Static Stresses

Gough H. J. 1947 Proc. I. Mech. E., vol. 156, p. 6, “Research and Development Applied to Bomb Disposal”.

Gough H. J. 1947 Proc. I. Mech. E., vol. 157, p. 328, “Note of Mechanical Engineering in the Oils and Fats Industry”.

Stanton T. E. Batson R. G. 1916 British Association Report, Newcastle, p. 288, “On the Fatigue Resistance of Mild Steel Under Various Conditions of Stress Distributions”.

Gough H. J. Pollard H. V. 1935 Proc. I. Mech. E., vol. 131, p. 3, “The Strength of Metals under Combined Alternating Stresses”.

Gough H. J. Pollard H. V. 1936 Proc. I. Mech. E., vol. 132, p. 549, “The Effect of Specimen Form on the Resistance of Metals to Combined Alternating Stresses”.

Gough H. J. “Some Experiments on the Resistance of Metals to Fatigue under Combined Stresses” (a monograph in course of publication by His Majesty's Stationery Office).

Peterson R. E. 1933 Trans. A.S.M.E., vol. 55, p. APM 157, “Stress-Concentration Phenomena in Fatigue of Metals”.

Peterson R. E. 1933 Trans. A.S.M.E., vol. 55, p. APM 79, “Model Testing as Applied to Strength of Materials”.

Mailander R. Bauersfeld W. 1934 Technische Mitteilungen Krupp, vol. 2, “Influence of Size and Shape of Specimens on the Fatigue Strength of Steel in Torsion”.

Horger O. J. 1935 Trans. A.S.M.E., vol. 57, p. A128, “Effect of Surface Rolling on the Fatigue Strength of Steel”.

Dolan T. J. Hanley B. C. 1948 Illinois University, Sixth Progress Report, “Effect of Size of Specimen on the Fatigue Strength”.

Peterson R. E. Wahl A.M. 1936 Trans. A.S.M.E., vol. 58, p. A15, “Two- and Three-Dimensional Cases of Stress Concentration and Comparison with Fatigue Tests”.

Frith P. H. 1948 Jl. Iron and Steel Inst., vol. 159, p. 385, “Fatigue Tests on Crankshaft Steels”.

Gough H. J. 1924 “Fatigue of Metals” (Scott Greenwood, London).

Gough H. J. Pollard H. V. 1937 Proc. Inst. Automobile Eng., vol. 31, p. 821, “Properties of Some Materials for Cast Crankshafts, with special reference to Combined Stresses”.

Guest J. J. 1940 Proc. Inst. Automobile Eng., vol. 35, p. 33, “Recent Research on Combined Stress”.

Cox H. L. “The effect of Holes on the strength of Materials Under Complex Stress Systems” (about to be published).

Inglis C. E. 1913 Trans. Inst. Nav. Arch., vol. 55, pt. I, p. 219, “Stresses in a Plate Due to the Presence of Cracks and Sharp Corners”.

Jenkin C. F. 1920 “Report on Materials of Construction used in Aircraft and Aircraft Engines” (His Majesty's Stationery Office, London).

Gough H. J. Tapsell H. J. 1925/1926 Aeronautical Research Committee, Reports and Memoranda, No. 1012, “Some Comparative Fatigue Tests in Special Relation to the Impressed Conditions of Test”.

Hatfield W. S. 1939 Jl. Iron and Steel Inst., Special Report No. 25, Section 5, Eighth Report on the Heterogeneity of Steel Ingots, “Study of a Ni-Cr-Mo-Va Steel Ingot”.

Gough H. J. Wood W. A. 1939 Proc. I. Mech. E., vol. 141, p. 175, and vol. 142, p. 175, “Deformation and Fracture of Mild Steel under Cyclic Stresses in Relation to Crystalline Structure”.

Hohenemser K. Prager W. 1933 Metallwirtschaft, vol. 12, p. 342, “The Problem of Fatigue Strength under Complex Stresses”.

Kirsch G. 1898 Z.V.D.I., vol. 42, “Theory of Flaws”.

Frocht M. M. 1935 Trans. A.S.M.E., vol. 57, p. A67, “Factors of Stress Concentration Photoelastically Determined”.

Frocht M. M. 1948 “Photoelasticity” (Chapman and Hall, London).

Wahl A. M. Beeuwkes R. 1934 Trans. A.S.M.E., vol. 56, p. 617, “Stress Concentrations Produced by Holes and Notches”.

Thum A. Kirmser W. 1943 V.D.I. Forshungsheft, vol. 419, “Superimposed Alternating Stresses”.

Jacobsen L. S. 1935 Trans. A.S.M.E., vol. 57, p. A154, “Torsional Stresses in Shafts having Grooves or Fillets”.

Cox H. L. “Stress Concentration in Twisted Shafts” (in course of publication).

Gough H. J. 1925 Aeronautical Research Committee, Reports and Memoranda No. 864, “The Effect of Keyways upon the Strength and Stiffness of Shafts Subjected to Torsional Stresses” (His Majesty's Stationery Office).

Gough H. J. Wood W. A. 1938 Jl. Inst. C.E., vol. 8, p. 249, “The Deformation and Fracture of Metals”.