The Film Lubrication of the Journal Bearing

Hersey M. D. “On the Laws of Lubrication in Journal Bearings,” Trans. Amer. Soc. Mech. E., 1915, vol. 37, page 167.

Howarth H. A. S. “A Graphical Analysis of Journal Lubrication,” Trans. Amer. Soc. Mech. E., 1923, vol. 45, page 421; 1924, vol. 46, page 809; and 1925, vol. 47, page 1073.

Howarth H. A. S. “Journal Running Positions,” Trans. Amer. Soc. Mech. E., 1928, vol. 51, Part 1, Applied Mechanics, page 21.

McKee S. A. R. T. “Friction of Journal Bearings as Influenced by Clearance and Length,” Trans. Amer. Soc. Mech. E., 1929, vol. 51, part 1, Applied Mechanics, page 161.

Hersey M. D. “Fundamental Action of Lubricants,” American Machinist, 1929, vol. 70, page 919.

Michell A. G. M. “Progress of Fluid Film Lubrication,” Trans. Amer. Soc. Mech. E., 1929, vol. 51, part 1, Machine-Shop Practice, page 153.

Kingsbury A. “On Problems in the Theory of Fluid-Film Lubrication, with an Experimental Method of Solution,” Trans. Amer. Soc. Mech. E., 1931, vol. 53, Applied Mechanics, page 59.

Reynolds O. “The Theory of Lubrication and its Application to Beauchamp Tower's Experiments,” Phil. Trans. Royal Soc, Series A, 1886, part 1.

Martin H. M. “Theory of Lubrication,” Engineering, 1915, vol. 100, page 101.

De F. “Journal Bearings,” Brown Boveri Review, 1919, vol. 6.

Stanton T. E. “On the Characteristics of Cylindrical Journal Lubrication at High Values of the Eccentricity,” Proc. Roy. Soc, Series A, 1923, vol. cii, page 241.

Stanton T. E. “Lubrication of Surfaces under High Loads and Temperatures,” Brit. Assoc. Report, 1927, page 347.

Goodman J. “Experimental Determination of the Distribution and Thickness of the Oil-Film in a Flooded Cylindrical Bearing,” Proc. Inst. C. E., 1928, vol. 226, page 242.

Brillié H. Robb A. M. “Oil Films and Bearings,” Trans. Inst. N. A., 1929, vol. lxxi, page 338.

Gibson A. H. “Hydraulics.”.

Bond W. N. “Introduction to Fluid Motion.”.

Johansen F. C. “Research in Mechanical Engineering by Small-Scale Apparatus,” Proc. 1. Mech. E., 1929, vol. i, page 151.

Kingsbury A. “Optimum Conditions in Journal Bearings,” read before the American Society of Mechanical Engineers, December 1931.