This report gives details of a theoretical analysis of the lubrication of ‘O’ ring seals. Under dry contact conditions the pressure gradient at inlet to the contact zone is infinite, and an iterative solution has been developed to determine the inlet sweep of pressure under conditions of elastohydrodynamic lubrication. The exit film thickness and pressures have also been determined for conditions of variable outlet viscosity and pressure gradient. Typical results for an ‘O’ ring are given for a standard seal section.
Get full access to this article
View all access options for this article.
References
1.
DennyD. F.WhiteC. M. ‘The sealing mechanism of flexible packings’, Ministry of Supply Memo. No. 3/47, 1947.
2.
BlokH.KoensH. J. ‘The “breathing” film between a flexible seal and a reciprocating rod’, Symp. Elastohydro-dynamic Lubrication, Proc. Instn mech. Engrs1965–66180 (Pt 3B), 221.
3.
DowsonD.SwalesP. D.‘The development of elasto-hydrodynamic conditions in reciprocating seals’, to be published inProc. 4th Int. Conf. on Fluid Sealing, Philadelphia, 1969.
4.
HookeC. J.LinesD. J.O'DonoghueJ. P. ‘Elasto-hydrodynamic lubrication of O-ring seals’, Proc. Instn mech. Engrs1966–67181 (Pt 1), 205.
5.
DysonA.NaylorH.WilsonA. R. ‘Measurement of oil-film thickness in elastohydrodynamic contacts’, Symp. Elastohydrodynamic Lubrication, Proc. Instn mech. Engrs1965–66180 (Pt 3B), 119.
