This paper describes an attempt to measure the elastohydrodynamic film thickness generated within the rolling contacts of a conventional taper roller thrust bearing. The technique used is simple and unambiguous and should be capable of application irrespective of the surface finish or geometry of the rolling elements.
DysonA.NaylorH.WilsonA. R. ‘The measurement of oil-film thickness in elastohydrodynamic contacts’, Symp. Elastohydrodynamic Lubrication, Proc. Instn mech. Engrs1965–66180 (Pt 3B), 119.
3.
MacConachieI. O.CameronA. ‘The measurement of oil film thickness in gear teeth’, J. bas. Engng, Trans. Am. Soc. mech. Engrs196082 (Series D), 29.
4.
GarnellP.HigginsonG. R. ‘The mechanics of roller bearings’, Symp. Elastohydrodynamic Lubrication, Proc. Instn mech. Engrs1965–66180 (Pt 3B), 197.
5.
SibleyL. B.OrcuttF. K. ‘Elastohydrodynamic lubrication of rolling contact surfaces’, Trans. Am. Soc. lubric. Engrs19614 (2), 234.
6.
ArchardJ. F.KirkM. ‘Hydrodynamic lubrication of Perspex’, Nature1962194.
7.
VickeryP. E. ‘Measurement of film thickness between normally approaching cylinders’, M. Sc. Project Report, University of Leeds, 1969.
8.
DysonA. ‘Investigation of the discharge-voltage method of measuring the thickness of oil films formed in a disc machine under conditions of elastohydrodynamic lubrication’, Proc. Instn mech. Engrs1966–67181 (Pt 1), 633.
9.
CameronR.‘Measurement of oil-film thickness between rolling discs by a variable-magnetic-reluctance technique’, Report 6, Symp. Experimental Methods in Tribology, Proc. Instn mech. Engrs1967–68182 (Pt 3G), 59.
10.
GraftonM. ‘Measurement of oil film thickness in a tapered roller thrust bearing’, M. Sc. Project Report, University of Leeds, 1968.
11.
DowsonD.HigginsonG. R. ‘A theory of roller bearing lubrication and deformation’, Paper 19, Proc. Lubric. and Wear Conv. 1963177, 216 (Instn Mech. Engrs, London).
12.
LooT. T. ‘Effect of curvature on the Hertz theory for two circular cylinders in contact’, J. appl. Mech., Trans. Am. Soc. mech. Engrs195880, 122.
