The applications and design of gas bearings are described. The fundamental theory and selected experimental confirmation are presented to supplement the comparatively few available routine design procedures.
GrassamN. S. (ed.) Gas Bearing Symposium1965 (University of Southampton, Southampton).
3.
GrossW. A.Gas film lubrication1962 (John Wiley and Sons, New York).
4.
ElrodH. G.MalanoskiS. B.‘Theory and design data for continuous-film, self-acting journal bearings of finite length’, Franklin Inst. Report I-A2049-13, 1960.
5.
VohrJ. H.ChowC. Y.‘Characteristics of herringbone-grooved, gas-lubricated journal bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196587, 568.
6.
MalanoskiS. B.‘Experiments on an ultra-stable gas journal bearing’, Mech. Techn. Inc. No. MTI-65 TR37, 1965.
7.
AdamsC. R.DworskiJ.ShoemakerE. M.‘Externally pressurized step journal bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196183, 595.
8.
LundJ. W.ArwasE. B.ChengH. S.NgC. W.PanC. H. T.‘Rotor-bearing dynamics design technology: Part III—Design handbook for fluid-film type bearings’, AFAPL-TR-65-45, Part III 1965 (Mech. Tech. Inc., Latham, New York).
9.
GunterE. J.HinkleJ. G.Jr.FullerD. D.‘Design guide for gas lubricated tilting-pad journal and thrust bearings’, Franklin Inst. Lab. Report I-A2392-3-1, 1964.
10.
EshelA.ElrodH. G.Jr.‘The theory of the infinitely wide, perfectly flexible, self-acting foil bearing’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196587, 831.
11.
BarlowE. J.‘Externally pressurized foil gas bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196587, 986.
12.
HuckabayA.StahlerA. F.‘Analysation, design, fabrication, and testing of a foil bearing rotor support system’, Ampex Corp. Report RR 66–8, 1966.
13.
EshelA.ElrodH. G.Jr.‘Stiffness effects on the infinitely wide foil bearing’, Am. Soc. Mech. Engrs Paper No. 66-LUBS-6, 1966.
14.
HirsG. G.‘The load capacity and stability characteristics of hydrodynamic grooved journal bearings’, Am. Soc. Lubric. Engrs Paper No. 64-LC-24, 1964.
MarcusR. H.CapellupoJ. P.LindbergA. W.‘Research on a dual free-rotor direction sensing device’, Universal Match Corp. Report ARL 127, 1961.
17.
DrescherH.‘Gleitlager mit Luftachinierung’, VDI Z195395, 1182.
18.
PanC. H. T.MalanoskiS. B.BroussardP. H.Jr.BurchJ. L.‘Theory and experiments of squeeze-film gas bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196688, 191.
MoriH.YabeH.ShibayamaT.‘Theoretical solution as a boundary value problem for externally pressurized porous gas-bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196587, 622.
22.
WildmannM.WrightA.‘The effect of external pressurization on self-acting foil bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196587, 631.
23.
TangI. C.GrossW. A.‘Analysis and design of externally pressurized gas bearings’, Trans. Am. Soc. lubric. Engrs19625 (No. 1), 261.
24.
CarfagnoS. P.McCabeJ. T.‘Summary of investigations of entrance effects in circular thrust bearings’, O.N.R. Interim Report I-A2049-24 (The Franklin Institute, Philadelphia).
25.
GrossW. A.‘A gas film lubrication study: Part I—Some theoretical analyses of slider bearings’, IBM Jl Res. Devel.19593, 237.
26.
TangT.‘Design and analysis of self-acting gas-lubricated slider bearings for noncontact magnetic recording’, Am. Soc. Mech. Engrs Paper No. 65-WA/MD/18, 1965.
27.
AdamsC. R.‘Design and fabrication of impact docking simulator air bearings’, Am. Soc. Lubric. Engrs Paper No. 64AM 4B4, 1964.
28.
MuijdermanE. A.‘New forms of bearing: the gas and spiral groove bearing’, Philips Tech. Rev.196425, 253.
29.
MuijdermanE. A.‘Analysis and design of spiral-groove bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs1966, Paper No. 66-LUBS-7.
30.
WildmannM.‘Note on the behaviour of grooved plate thrust bearings with compressible lubricants’, Ampex Corp. Report RR 66–4, 1966.
31.
PanC. H. T.‘Gas lubricated spherical bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196385, 311.
32.
GrossW. A.‘Gas bearings: a survey’, Wear19636, 423.
33.
ConstantinescuV. N.Lubrificatia cu gaze1963 (Academici Romine, Bucharest).
34.
BurgdorferA.‘The influence of the molecular mean free path on the performance of hydrodynamic gas lubricated bearings’, J. basic. Engng, Trans. Am. Soc. mech. Engrs, Series D195981, 94.
35.
MarshHarryThe stability of aerodynamic gas bearings1963 (Cambridge University Press).
36.
RiceJ. R.‘Misalignment torques of hydrodynamic gaslubricated journal bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196587, 193.
37.
WildmannM.GlaserJ.GrossW. A.MoorsD. E.RoodL.CooperS.‘Gas-lubricated stepped thrust bearing—a comprehensive study’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196587, 213.
38.
SternlichtB.ArwasE. B.‘Modern gas-bearings turbomachinery: Part 2: research and application’. Mech. Engng1966 (Feb.), 42.
39.
HinkleJ. G.FullerD.D.‘Evaluation of friction and wear characteristics of materials for gas-lubricated bearings under conditions of start-stop, and whirl induced rubbing’ (U.S. Dept of Commerce) Franklin Inst. Res. Lab. Final Report F-B2232, 1965 (Sept.).
40.
ForseR. W.PattersenA. G.‘Aerodynamic gas spin axis bearings for gyros’, Proc. Symposium on Gyros 1965 (Instn Mech. Engrs, London).
41.
PetersA.DevlinP.‘A bibliography (with abstracts) on gas-lubricated bearings’, Franklin Inst. Interim Report I-A2049-25, 1965.
MichaelW. A.‘Approximate methods for time-dependent gas-film lubrication problems’, J. appl. Mech., Trans. Am. Soc. mech. Engrs196385, 509.
44.
ElrodH. J.Jr.NgC. W.‘A theory for turbulent fluid films and its applications to bearings’, Am. Soc. Mech. Engrs Paper No. 66-LUB-12, 1966.
45.
UnterbergW.AusmanJ. S.‘Condensing vapour lubrication of self-acting long journal bearings’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196688, 236.
46.
OrcuttF. K.‘Experimental investigation of a condensing vapour lubricated thrust bearing’, Trans. Am. Soc. lubric. Engrs19647 (No. 2), 168.
47.
HamiltonD. B.WalowitJ. A.AllenC. M.‘A theory of lubrication by micro-irregularities’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196688, 177.
48.
AusmanJ. S.‘On the behaviour of gas-lubricated journal bearings subjected to sinusoidally time-varying loads’, Am. Soc. Mech. Engrs Paper No. 64-LUB-27, 1964.
49.
GriffinW. S.RichardsonH. H.YamanamiS.‘A study of fluid squeeze-film damping’, Am. Soc. Mech. Engrs Paper No. 65-WA/Aut-6, 1965.
50.
LichtL.ElrodH. G.Jr.‘A study of the stability of externally pressurized gas bearings’, J. appl. Mech., Trans. Am. Soc. mech. Engrs196082, 250.
51.
LundJ. W.‘The hydrostatic gas journal bearing with journal rotation and vibration’, J. basic Engng, Trans. Am. Soc. mech. Engrs, Series D196486, 328.
52.
LewisP.EusepiM.‘Research on gas lubrication at high temperatures and low flow rates’, Tech. Documentary Report No. APL TDR 64–56, Part II 1965 (Mech. Techn. Inst.).
53.
MoriH.MoriI.‘On the stabilizing methods of externally pressurized thrust gas bearings’, Am. Soc. Mech. Engrs Paper No. 66-LUB-5, 1966.
54.
NewgardP. M.KiangR. L.‘Elastic orifices for pressurized gas bearings’, Trans. Am. Soc. lubric. Engrs1966 (to be published).
55.
KriegerR. J.DayH. J.HughesW. F.‘The MHD hydrostatic thrust bearing—theory and experiments’, Am. Soc. Mech. Engrs Paper No. 66-LUB S-8, 1966.
56.
ConstantinescuV. N.‘On the possibilities of magnetogasodynamic lubrication’, Am. Soc. Mech. Engrs Paper No. 66-LUB-C, 1966.
