Transformer noise is caused almost entirely by vibrations of the iron circuit. The means by which vibrations are generated are discussed, together with factors affecting their magnitude. The transmission path from the iron circuit to the transformer tank wall is examined and modes of resonance and methods of increasing the attenuation along this path are discussed.
External devices for attenuating noise are described, together with methods for finding the required attenuation for particular site conditions.
Get full access to this article
View all access options for this article.
References
1.
WilkinsonJ. T.ThompsonJ. E.‘Lamination flatness and transformer noise’, Electrical Times1962141, 233.
2.
HenshellR. D.BennettP. J.MccallionH.MilnerM.‘Natural frequencies and mode shapes of vibration of transformer cores’, Proc. Instn elect. Engrs1965112 (ii), 2133.
ThompsonJ. E.WilkinsJ. T.‘Harmonics in transformer noise’, Electrical Times1963 (14 Nov.).
5.
WilsonA.‘Noise: final report’, Cmnd. 20561963 (H.M. Stationery Office, London).
6.
KostenC. W.Van OsG. J.‘Community reaction criteria for external noises’, Proc. Nat. Phys. Lab. Symposium, The Control of Noise1962 (H.M. Stationery Office, London).
7.
ChurcherB. G.KingA. J.‘The limitation of transformer noise’, J. Instn elect. Engrs194087, 539.
8.
BeranekL. L.Acoustics1954, 348 (McGraw-Hill Book Co., New York).
