Paper 1: Design Approach to Creep-Rupture of Structural Components for Materials of Limited Ductility

Peterson R. E. ‘Fatigue of metals in engineering and design‘, 1962 Edgar Marburg Lecture. Published in booklet form by the American Society for Testing and Materials, Philadelphia, Pennsylvania.

Neuber H. ‘Theory of stress concentration for shear strained prismatical bodies with arbitrary non-linear stress-strain law‘, Trans. Amer. Soc. mech. Engrs 1961 28, Series E, 544.

Stowell E. Z. ‘Stress and strain concentration at a circular hole in an infinite plate‘, N.A.C.A. TN-2073, 1950. Also, Hardrath, H. F. and Ohman, L. ‘A study of elastic and plastic stress concentration factors due to notches and fillets in flat plates', N.A.C.A. Report 1117, 1953.

Davis E. A. Manjoine M. J. ‘Effect of notch geometry on rupture strength at elevated temperatures‘, Amer. Soc. Test. Mater.—S.T.P. No. 128, 1953, 67.

Manjoine M. J. ‘Size effect on notched rupture time‘, Trans. Amer. Soc. mech. Engrs 1962, 84, Series D, 220.

Connelly F. M. Davis E. A. Manjoine M. J. Westinghouse Research Laboratories Report 8–0526-R5, 1958 (unpublished).

Conrad J. D. Mochel N. L. ‘Operating experiences with high temperature steam turbine rotors and design improvements in rotor blade fastening‘, Trans. Amer. Soc. mech. Engrs 1958 80, 1210.

Peterson R. E. Stress concentration design factors 1953 (John Wiley and Sons).

Hanink D. K. Voorhees H. R. ‘Notched-bar creep-rupture of a cast heat-resistant alloy at temperatures where ductility is limited‘, Trans. Amer. Soc. mech. Engrs 1962 84, Series D, 233.

Goldhoff R. M. ‘Stress concentration and size effects in a Cr-Mo-V steel at elevated temperatures‘, presented at the Joint International Conference on Creep, ASME, ASTM, I.Mech.E, New York, London, 1963. (10a) Couts, W. H., Jr. and Freeman, J. W. ‘Notch rupture behaviour as influenced by specimen size and preparation', Trans. Amer. Soc. mech. Engrs 1962 84, Series D, 222.

Carlson R. L. Mcdonald R. J. Simmons W. F. ‘Factors influencing the notch-rupture strength on heat-resistant alloys at elevated temperatures‘, Trans. Amer. Soc. mech. Engrs 1956 78, 349.

Rankin A. W. Seguin B. R. ‘Report of the investigation of the turbine wheel fracture at Tanners Creek‘, Trans. Amer. Soc. mech. Engrs 1956 78, 1527.

Manjoine M. J. ‘Simulated service testing at elevated temperature‘, presented at the Joint International Conference on Creep, ASME, ASTM, I.Mech.E., New York, London, 1963.

Hetenyi Miklos ‘Some applications of photo-elasticity in turbine-generator design‘, Trans. Amer. Soc. mech. Engrs 1939 61, A151.

Leven M. M. Unpublished photo-elastic test data, Westinghouse Research Laboratories Report 8–0526-R3, 1956.