Discussion: Session 6

Larson F. R. Miller J. ‘A time-temperature relationship for rupture and creep stress’, Trans. Amer. Soc. mech. Engrs 1952 74, 765.

Krisch A. Wepner W. ‘Zur Umrechnung von Zeitstandwerten auf andere Temperaturen’, Arch. Eisenhuttenw. 1957 28, 339.

Dorn J. E. ‘The spectrum of activation energies for creep’, Creep and Recovery, Amer. Soc. Metals 1957, 255.

Harper J. Dorn J. E. ‘Viscous creep of aluminium near its melting temperature’, Acta Metall. 1957 5, 654.

Manson S. S. Haferd A. M. ‘A linear time-temperature relation for extrapolation of creep and stress rupture data’, National Advisory Commission for Aeronautics Report 1953, TN 2890.

Conrad H. ‘Correlation of high temperature creep and rupture data’, Trans. Amer. Soc. mech. Engrs, J. basic Engng 1959 81D, 617.

Greenwood J. N. Miller D. R. Suiter J. W. ‘Inter-granular cavitation in stressed metals’, Acta Metall. 1954 2, 250.

Brookes P. E. Kirby N. Burke W. T. ‘The creep and high temperature fatigue properties of the magnesium-base canning alloy, Magnox A. 12’, J. Inst. Metals 1959–60 88, 500.

Servi I. S. Grant N. J. ‘Creep and stress rupture behaviour of aluminium as a function of the purity’, Trans. Amer. Inst. min. Engrs 1951 191, 909.

Grant N. J. Bucklin A. G. ‘Creep rupture and recrystallization of Monel from 700–1700°F’, Trans. Amer. Soc. Metals 1953 45, 151.

Monkman F. C. Grant N. J. ‘An empirical relationship between rupture life and minimum creep rate in creep-rupture tests’, Proc. Amer. Soc. Test. Mater. 1956 56, 593.

Feltham P. Meakin J. D. ‘Creep in face-centred-cubic metals with special reference to copper’, Acta Metall. 1959 7, 614.

Davies P. W. Wilshire B. ‘Interpretation of the relationship between creep and fracture’, Iron and Steel Institute Special Report 1961 70, 34.

Machlin E. S. ‘Creep-rupture by vacancy condensation’, Trans. Amer. Inst. min. Engrs 1956 206, 106.

Jones R. B. Harris J. E. Paper 15, p. 1–1.

Shewmon P. G. Rhines F. N. ‘Rate of self-diffusion in polycrystalline magnesium’, J. Metals 1954 6, 1021.

Zener C. Hollomon J. H. ‘Plastic flow and rupture of metals’, Trans. Amer. Soc. mech. Engrs 1944 33, 163.

Nabarro F. R. N. ‘Deformation of crystals by the motion of single ions’, Proc. Bristol Conference on Strength of Solids 1948, 75.

Herring C. ‘Diffusional viscosity of a polycrystalline solid’, J. appl. Phys. 1950 21, 437.

Harris J. E. Jones R. B. ‘Directional diffusion in magnesium alloys’, J. nucl. Mat. 1963 10, 360.

McKeown J. Eborall R. Lushey R. D. S. ‘The creep properties of 99.8 per cent purity aluminium at 20–80°C and at 250°C and 450°C, Metallurgia 1954 50, 13.

Clauss F. J. ‘An examination of high-temperature stress-rupture correlating parameters’ Proc. Amer. Soc. Test. Mater. 1960 60, 905.

Goldhoff R. M. ‘Comparison of parameter methods for extrapolating high-temperature data’ Trnas. Amer. Soc. mech. Engrs 1959 81, 629.

Dickenson J. H. S. ‘Some experiments on the flow of steels at a low red heat with a note on the ceiling of heated steels’, J. Iron Steel Inst. 1922 106, 103.

Bailey R. W. ‘A critical examination of procedures used in Britain and the United States to determine creep stress for the design of power plant for long life at high temperatures’, Proc. Instn mech. Engrs 1954 168, 470.

Draper J. H. M. ‘Relaxation testing of steam turbine bolt materials with simulated re-tightening’, Iron & Steel, Lond. 1961 34, 623.