Paper 34: A Comparison of the Creep-Rupture Strength of Austenitic Steels of the 18–8 Series

Norton F. H. The creep of steel at high temperatures 1929 (McGraw-Hill, New York).

‘Babcock and Wilcox install new equipment for creep and stress-rupture studies’, Ind. Heating June 1950 17, 988.

Stutzman M. J. Faber J. W. ‘Expression of stress-rupture data with functions derived by the least-squares method’, Mater. Res. and Stand. June 1961 1, no. 6, 460.

Hald A. Statistical theory with engineering application, 1952, 558 (John Wiley and Sons, New York).

Snedecor G. W. Statistical methods 1946, 138 (Iowa State Press).

Ezekiel M. Fox K. A. Methods of correlation and regression analysis 1959, 322 (John Wiley and Sons, New York).

Croxton S. E. Cowden D. J. Applied general statistics 1955, 512 (Prentice-Hall, New York).

Soldan H. M. ‘The SP-5 and SP-6 projects’, Paper presented at the 1962 National Power Conference, Baltimore, Maryland, September 1962.

Leyda W. E. ‘Investigation of the effect of heat treatment on the creep-rupture properties of the 18 Cr-8 Ni-Ti alloy’, Paper presented at the International Conference on Long-time creep-rupture behaviour of heat resisting alloys (Sponsored by the German Society of Metallurgists), Dusseldorf, Germany, June 1960.

Krebs T. M. ‘New creep-rupture data on furnace tubes’, Hydrocarbon Processing and Petroleum Refiner August 1962 41, no. 8, 135.

White J. E. Freeman J. W. ‘Metallurgical principles governing the creep-rupture strength of type 321 (18–8+Ti) austenitic steel superheater tubing with limited extension to type 304 (18 Cr-8 Ni) and type 316 (18 Cr-8 Ni+Mo) austenitic steels’, Paper presented at the 1962 National Power Conference, Baltimore Maryland, September 1962.