Paper 71: Service Experiences at 1050°F and 1100°F of Piping of Austenitic Steels

Fairchild P. F. ‘Eight years of experience with austenitic steel piping materials at elevated steam conditions’, Tram. Amer. Soc. mech. Engrs November 1956 56-A-181.

Cullen T. M. Freeman J. W. ‘Metallurgical factors influencing hot ductility of austenitic steel steam piping at heat affected zone temperatures during welding”, presented at the National Power Conference, Baltimore, Maryland, September 1962; Trans. Amer. Soc. mech. Engrs 1963.

Reports of a Sub-group of Task Force SP-5, 1961.

Wylie R. D. ‘High temperature tensile strength of 16-8-2 welds’, The Babcock & Wilcox Company, December 1957 (private correspondence).

Carpenter O. R. Wylie R. D. ‘The importance of weld composition and hot ductility with respect to austenitic weld cracking’, The Babcock & Wilcox Company Report No. 383; U.S. Atomic Energy Commission Welding Advisory Committee, Augusta, Georgia, September 1955.

Soldan H. M. Mayne C. R. ‘Ductility related to service performance of heavy wall austenitic pipe welds’, Amer. Weld. Soc. Welding Res. J. supplement, March 1957; Amer. Soc. Metals Metal Progress, March 1957 71, No. 3.

Caughey R. H. Benz W. G. Jr. ‘Material selection and fabrication, main steam piping, Eddystone No. 1, 1200°F and 5000 lb/in2 service’, Trans. Amer. Soc. mech. Engrs October 1960, 59-A-237.

Soldan H. M. ‘The SP-5 and SP-6 projects’, presented at the National Power Conference, Baltimore, Maryland, September 1962; Trans. Amer. Soc. mech. Engrs 1963.

Annual Report AC-2, December 1960, Amer. Soc. mech. Engrs Research 1959–1960.

Baker R. A. ‘The case for 1100°F steam, Mercer Generating Station’, presented at the American Power Conference, 24th Annual Meeting, Chicago, Illinois, 29th March 1962.