Paper 8: Stress Concentration and Size Effects in a Cr-Mo-V Steel at Elevated Temperatures

Brown W. F. Jr Manson S. S. Sachs G. Sessler J. G. ‘Literature survey on influence of stress concentrations at elevated temperatures’, Amer. Soc. Test. Mater.—S.T.P. No. 260, December 1959, 1.

Brown W. F.i Jr. ‘Summary of the session; new investigations relating to stress concentrations under creep conditions’, J. Basic Engng, Trans. Amer. Soc. mech. Engrs, June 1962, Series D, 243.

Lubahn J. D. ‘On the applicability of notch tensile test data to strength criteria in engineering design’, Amer. Soc. mech. Engrs, Paper No. 55-A-149, 1955.

‘Screening tests for high-strength, alloys using sharply notched cylindrical specimens’, Fourth Report of the A.S.T.M. Special Committee on Fracture Testing of High-Strength Materials, Mater. Res. Stand., March 1962, 196.

Gulyaev V. N. ‘Effect of size of specimen upon the long time strength of 12KHMF and 1KH18N12T’, Z. Lab. 1960 26(2) (available as English translation).

Gulyaev V. N. ‘The scale factor in testing for creep strength’, Ibid. 1961 27(3), 327 (available as English translation).

Manjoine M. J. ‘Size effect on notched rupture time’, J. Basic Engng, Trans. Amer. Soc. mech. Engrs, June 1962, Series D, 220.

Couts W. H. Jr Freeman J. W. ‘Notch rupture behaviour as influenced by specimen size and preparation’, Ibid., 222.

Goldhoff R. M. ‘The effect of creep prestrain on creep-rupture properties of variable notch sensitivity Cr-Mo-V steel’, Mater. Res. April 1962, 26.

Goldhoff R. M. ‘Stress relaxation of a Cr-Mo-V steel heat treated to various notch sensitivities’, Amer. Soc. Test. Mater. Preprint No. 82 1962, 16 pp.

Davis E. A. Manjoine M. J. ‘Effect of notch geometry on rupture strength at elevated temperatures’, Symposium on Strength and Ductility of Metals at Elevated Temperatures, Amer. Soc. Test. Mater.—S.T.P. No. 128, June 1952, 67.

Widmer R. Grant N. J. ‘The role of atmosphere in the creep-rupture behaviour of 80% Ni-20% Cr alloy’, J. Basic Engng, Trans. Amer. Soc. mech. Engrs, December 1960 Series D, 882.

Reuther C. Shahinian P. Achter M. R. ‘Metals and alloys at elevated temperatures’, Report of Naval Res. Lab. Progress, December 1960, 25; April 1961, 33; June 1961, 25.

Leven M. M. ‘Stress gradients in grooved bars and shafts’, Proc. Soc. Exper. Stress Analysis 1955 13(1), 207.

Wundt B. M. ‘A unified interpretation of room-temperature strength of notched specimens as influenced by their size’, Amer. Soc. mech. Engrs, Paper No. 59-Met-9 1959.

Griffith G. E. ‘Experimental investigation of the effects of the plastic flow in a tension panel with a circular hole’, N.A.C.A. TN-1705, September 1948.

Stowell E. Z. ‘Stress and strain concentration at a circular hole in an infinite plate’, N.A.C.A. TN-2073, April 1950.

Hardrath H. F. Ohman L. ‘A study of elastic and plastic stress concentration factors due to notches and fillets in flat plates’, N.A.C.A. TN-2566, December 1951.

Budiansky B. Vidensek R. J. ‘Analysis of stresses in the plastic range around a circular hole in a plate subjected to uniaxial tension’, N.A.C.A. TN-3542, October 1955.

Goldhoff R. M. ‘The application of Rabotnov's creep parameter’, Trans. Amer. Soc. Test. Mater. 1961 61, 907.

Box W. A. ‘The effect of plastic strains on stress concen-centrators’, Proc. Soc. exp. Stress Anal. 1951 8(2), 99.

Peterson R. E. Stress concentration design factors, 1953, Figs 25 and 26 (John Wiley and Sons).