Paper 35: Cyclic Strain Accumulation under Complex Multiaxial Loading

Bairstow L. ‘The elastic limits of iron and steel under cyclical variations of stress’, Phil. Trans, roy. Soc. 1911 210, Series A, 35.

Lazan B. J. ‘Dynamic creep and rupture properties of temperature-resistant materials under tensile stress’, Proc. Amer. Soc. Test. Mater. 1949 49, 757.

Manjoine M. J. ‘Effect of pulsating loads on the creep characteristics of aluminium alloy 14S-T’, Proc. Amer. Soc. Test. Mater. 1949 49, 788.

Kennedy A. J. ‘Effect of fatigue stresses on creep and recovery’, International conference on fatigue of metals September 1956, 401. (Inst. mech. Eng., Lond.; Amer. Soc. mech. Engrs.).

Meleka A. H. Evershed A. V. ‘The dependence of creep behaviour on the duration of a superimposed fatigue stress’, J. Inst. Metals May 1960, 411.

Benham P. P. ‘Axial-load and strain-cycling fatigue of copper at low endurance’, J. Inst. Metals 1961 89, 328.

Sullivan C. P. ‘Repeated tensile loading of iron and steel’, Thesis submitted in partial fulfilment for the Sc.D. degree in metallurgy at the Massachusetts Institute of Technology, June 1960.

Greenwood J. N. ‘The influence of vibration on the creep of lead’, Proc. Amer. Soc. Test. Mater. 1949 49, 834.

Coffin L. F. Jr ‘The stability of metals under cyclic plastic strain’, Trans. Amer. Soc. mech. Engrs, J. Basic Eng. 1960 82, Series D, no. 3, 671.

Moyar G. J. ‘A mechanics analysis of rolling element failures’. Dept. Theoret. Appl. Mech. Report no. 182, Univ. of Illinois, December 1960, 55.

Bendler H. M. Wood W. A. ‘Effect of superimposed static tension on the fatigue process of copper subjected to alternating torsion’, Trans. Amer. Inst. min. (metall.) Engrs February 1962, 18.

Moyar G. J. Sinclair G. M. Authors’ closure to discussion of ‘Cumulative plastic deformation in rolling contact’, Amer. Soc. mech. Engrs Paper no. 62-Met-4 1962.

Lubahn J. D. Felgar R. P. Plasticity and creep of metals 1961, 495 (John Wiley and Sons, New York).

Johnson A. E. Henderson J. Mathur V. ‘Creep under changing complex stress systems’. Engineer 1958 206, 209.

Johnson A. E. ‘Complex-stress creep of metals’, Met. Rev. 1960 5, no. 20, 447.

Taylor G. I. Quinney H. ‘The plastic deformation of metals’, Phil. Trans. roy. Soc. (1931–2) 230, Series A, 323.

Hill R. The mathematical theory of plasticity 1950, 72 (Oxford).

Schwiebert P. D. Moyar G. J. ‘An application of linear hardening plasticity theory to cycle and path dependent strain accumulation’, Dept. Theoret. Appl. Mech. Report no. 212, University of Illinois, January 1962.

Backofen W. A. Shaler A. J. Hundy B. B. ‘Mechanical anisotropy in copper’, Trans. Amer. Soc. Metals, 1954 45, 655.