Paper 46: Relation between Microstructure and Creep Resistance in Nickel-Base Alloys

Rowe John P. Freeman J. W. ‘Effect of overheating on creep-rupture properties of S-816 alloy at 1500°F’, N.A.CA. TN4081, December 1957.

Rowe John P. Freeman J. W. ‘Effect of overheating on creep-rupture properties of HS-31 alloy at 1500°F’, N.A.C.A. TN4083, December 1957.

Rowe John P. Freeman J. W. ‘Effect of overheating on creep-rupture properties of M252 alloy’, N.A.C.A TN4224, March 1958.

Rowe John P. Freeman J. W. ‘Effect of overheating on creep-rupture properties of M252 and Inconel 700 alloys at 1500° and 1600°F’. Final Report to Nat. Aero. Space Admin., Washington, D.C. from University of Michigan Research Institute, March 25, 1960.

Nordheim R. Grant N. J. ‘Aging characteristics of nickel-chromium alloys hardened with titanium and aluminium’, J. Metals 1954 6, 211.

Hignett H. W. G. ‘High temperature alloys in British jet engines’. A lecture presented before the Detroit Chapter of Amer. Soc. Metals on November 12, 1951. The lecture is reprinted by the International Nickel Company, Inc.

Bigelow W. C. Amy J. A. ‘Electron metallographic studies of nickel-base heat-resistant alloys’, W.A.D.C. TR58–406, August 1958.

Taylor A. ‘Constitution of nickel-rich quaternary alloys of the Ni-Cr-Ti-Al system’, J. Metals 1956 8, 1356.

Pfeil L. B. Allen N. P. Conway C. G. ‘Nickel-chromium-titanium alloys of the Nimonic 80 type’, A Symposium on High Temperature Steels and Alloys for Gas Turbines, Special Report 43, The Iron and Steel Institute, 1952.

Rowe J. P. Freeman J. W. ‘Relations between micro-structure and creep-rupture properties of nickel-base alloys as revealed by overtemperature exposures’. Final Report to Nat. Aero. Space Admin., Washington, D.C. from University of Michigan Office of Research Administration, September 1961.

Bigelow W. C. Amy J. A. Brockway L. O. ‘Electron microscopic identification of theγ′ phase of nickel-base alloys’, Proc. Amer. Soc. Test. Mater. 1956 56, 945.

Weertman J. ‘Theory of creep of dispersion hardened alloys’, N.R.L. Report 5123, April 15, 1958.