A theoretical approach is described which overcomes the problems of convergence previously associated with obtaining solutions of the elastohydrodynamic equations for a reciprocating, rectangular section rubber seal. Convergence of this method is extremely rapid. Results are presented which illustrate that it is suitable both for instrokes and outstrokes at realistic sealed pressures. Experimental measurements of pressure distribution are presented for comparison.
Get full access to this article
View all access options for this article.
References
1.
HookeC. J.LinesD. J.O'DonoghueJ. P., ‘A theoretical study of the lubrication of reciprocating O-ring seals’, Proc. 3rd Int. Conf. Fluid Sealing, 1967.
2.
TheyseF. H., ‘The inverse hydrodynamic theory and its application in the design of controlled leakage seals between moving parts’, Proc. 3rd Int. Conf. Fluid Sealing, 1967.
3.
RobertsA. D.SwalesP. D., ‘The elastohydrodynamic lubrication of a highly elastic cylindrical surface’, Brit. J. Appl. Phys., 1969, 2, 1317.
4.
GibsonI. A.HookeC. J.O'DonoghueJ. P., ‘Elastohydrodynamic lubrication of O-ring seals’, Proc. Instn mech. Engrs, 1970, 184, 197.
5.
HookeC. J.O'DonoghueJ. P., ‘Elastohydrodynamic lubrication of soft, highly deformed contacts’, J. Mech. Engng Sci., 1972, 14, 34.
6.
BaglinK. P.ArchardJ. F., ‘An analytic solution of the elastohydrodynamic lubrication of materials of low elastic modulus’, Proc. Instn mech. Engrs, Symposium on Elastohydrodynamic Lubrication, 1972.
7.
SwalesP. D.DowsonD.LathamJ. L., ‘Theoretical and experimental observations of the behaviour of soft elastic materials under elastohydrodynamic conditions’, Proc. Instn mech. Engrs, Symposium on Elastohydrodynamic Lubrication, 1972.
8.
DowsonD.SwalesP. D., ‘The development of elastohydrodynamic conditions in a reciprocating seal’, Proc. 4th Int. Conf. Fluid Sealing, 1969.
9.
FieldG. J.NauB. S., ‘An experimental study of reciprocating rubber seals’, Proc. Instn mech. Engrs, Symposium on Elastohydrodynamic Lubrication, 1972.
10.
FieldG. J.NauB. S., ‘A theoretical study of the elastohydrodynamic lubrication of reciprocating rubber seals’, Trans. Am. Soc. lub. Engrs, 1975, 18, 48.
11.
RohdeS. M.OhK. P., ‘A unified treatment of thick and thin film elastohydrodynamic problems by using higher order element methods’, Proc. R. Soc., 1975, A343, 315.
12.
OhK. P.RohdeS. M., ‘Numerical solution of the point contact problem using the finite element method’, Int. J. Num. methods Engng, 1977, 11, 1507.
13.
ZienkiewiczO. C., The finite element method in engineering science, 1971 (McGraw-Hill, London).
14.
HerrmannL. R., ‘Elasticity equations for incompressible and nearly incompressible materials by a variational theorem’, J. AIAA, 1965, 3, 1896.
15.
RuskellL. E. C., ‘Reynolds equation and elastohydrodynamic lubrication in metal seals’, Proc. R. Soc., 1976, A349, 383.
