Fatigue tests on simple, fillet-welded, mild steel lap joints have been carried out to determine the effects of a corrosive environment and random loading. At normal testing frequencies, a brine-drip environment had no effect on the constant-amplitude fatigue strength at short endurances. At stresses less than the in-air fatigue limit, the corrosive environment was sufficient to allow crack growth at very low stress levels. In these corrosive environment tests, reducing the test frequency by a factor of 50 halved the life. The results of narrow-band random loading tests could be predicted reasonably accurately either by a fracture mechanics method or by Miner's rule.
Get full access to this article
View all access options for this article.
References
1.
GurneyT. R.Fatigue of welded structures1968 (Cambridge University Press).
2.
SwansonS. R. ‘Random load fatigue testing: A state of the art survey’, Bull. Am. Soc. Test. Mater.19688 (No. 4), 10–44.
3.
WhiteD. J.LewszukV. ‘Cumulative damage in push-pull fatigue of fillet-welded mild steel plate subjected to narrow band random loading’, Proc. Instn mech. Engrs1970–71185 (No. 28/71), 339–351.
4.
ANON.Proceedings of conference on fatigue of welded structures19712, Session IV (Welding Institute).
