A water jet of 50 mm diameter is used in conjunction with a calibrated split-platen pressure cell to determine how the normal and shear stresses engendered during perpendicular and inclined impact against nominally rigid surfaces, vary with time.
Get full access to this article
View all access options for this article.
References
1.
DaneshiG. H.HawkyardJ. B. ‘A split-platen pressure cell for the measurement of pressure distribution in upsetting operations’, Int. J. mech. Sci.197113, 355.
2.
PrandtlL.Essentials of fluid dynamics1952 (Blackie and Sons Ltd, Edinburgh).
3.
CookS. C. ‘Erosion by water-hammer’, Proc. R. Soc.1928A119, 481.
4.
De HallerP.Schweiz. Bauztg1933101, 243 and 260.
5.
EngelO. G. ‘Mechanism of high-speed-waterdrop erosion of methyl methacrylate plastic’, J. Res. natn. Bur. Stand.195554, 281.
6.
BowdenF. P.BruntonJ. H. ‘Deformation of solids by liquid impact at supersonic speeds’, Proc. R. Soc.1961A263, 433–450.
7.
JolliffeK. H. ‘The application of dislocation etching techniques to the study of liquid impact’, Phil. Trans. R. Soc.1966A260, 101.
8.
BruntonJ. H.Deformation of solids by liquid impact at supersonic speeds Ph. D. Thesis, University of Cambridge, 1959.
9.
MortonW. B.CloseL. J. ‘Notes of Hertz's theory of the contact of elastic bodies’, Phil. Mag.192243, 320.
10.
HertzH. J.Z. angew. Math. Mech.188192, 156.
11.
SkalakR.FeltD. ‘Impact on the surface of a compressible fluid’, J. Engng Ind., Trans. Am. Soc. mech. Engrs196688B, 3.
MukiR. ‘Asymmetric problems of the theory of elasticity for a semi-infinite solid and a thick plate’, Progress in solid mechanics 1 (SneddonI. N.HillR.) 1960 (North Holland Publishing Company, Amsterdam).
14.
GardonR.AkfiratJ. C. ‘The role of turbulence in determining the heat-transfer characteristics of impinging jets’, Int. J. Heat Mass Transfer19658, 1261.
15.
GardonR. ‘A transducer for the measurement of heat transfer’, J. Heat Transfer196082, 396.
16.
GardonR.CobouqueJ. ‘Heat transfer between a flat plate and jet of air impinging on it’, Proc. Conf. Int. Heat Transfer1961 (American Society of Mechanical Engineers, New York).
17.
NevinsR. G.Ph. D. Thesis, University of Illinois, 1954.
SchraderH. ‘Stromungsvorgauge und Stoffubertragung’, ForschHft. VDI1961484.
20.
VickersG. W.The characterization and determination of erosion damage resulting from liquid-jet impact Ph. D. Thesis, University of Manchester Institute of Science and Technology, 1972.
21.
JohnsonW.Impact strength of materials1972 (Edward Arnold, London).
22.
HeymannF. J. ‘On the shock wave velocity and impact pressure in high-speed liquid-solid impact’, J. bas. Engng, Trans. Am. Soc. mech. Engrs196890, 400.
23.
BruntonJ. H. ‘Erosion by liquid shock’, Proc. 2nd Conf. Rain Erosion Allied Phenomena1967 (H. M. S. O., London).
24.
ThomasG. P.Deformation of metals by the repeated impact of liquids Ph. D. Thesis, University of Cambridge, 1966.
25.
BruntonJ. H.CamusJ. J. ‘The flow of a liquid drop during impact’, Proc. 2nd Conf. Rain Erosion Allied Phenomena1970 (Royal Aircraft Establishment, Farnborough, Hampshire).
26.
FyallA. A. ‘Single impact studies with liquids and solids’, Proc. 2nd Meersburg Conf. 1967 (H. M. S. O., London).
27.
FieldJ. E.CamusJ. J.GorhamD. A. ‘Single impact erosion processes’, Proc. 3rd Conf. Rain Erosion Allied Phenomena1970 (Royal Aircraft Establishment, Farnborough, Hampshire).
28.
KenyonH. F. ‘Erosion by water jet impacts’, A. E. I. Rept. No. T. P. 1R, 5587, Parts I-IV and V, 1967.
29.
VickersG. W.JohnsonW. ‘Erosion damage in α-brass and Perspex due to repeated water jet impact’, Int. J. mech. Sci.197214, 765.
