The technique of using mass transfer measurements (by sublimation of naphthalene) together with the Chilton–Colburn analogy is shown to be feasible for evaluation of heat transfers from impinging jets. The method is then used to determine heat transfer coefficients at the burner walls in models of jet–impingement furnaces.
Get full access to this article
View all access options for this article.
References
1.
PerryJ.BoxallT. D.WillinghamR. C.WinterE. F.WilcockR. ‘Rapid heating of steel for hot working’, Steel Times1967194, 761.
2.
Anon. ‘Rapid heating advances commercially’, Metal Form.197138 (No. 4), 96.
3.
KercherD. M.TabokoffW. ‘Heat transfer by a square array of round air jets impinging perpendicular to a flat surface including the effect of spent air’, J. Engng Pwr, Trans. Am. Soc. mech. Engrs197092, 73.
4.
PerryK. P. ‘Heat transfer by convection from a hot gas jet to a plane surface’, Proc. Instn mech. Engrs1954168, 775.
5.
HuangG. C. ‘Investigations of heat transfer coefficients for air flow through round jets impinging normal to a heat transfer surface’, J. Heat Transfer, Trans. Am. Soc. mech. Engrs196385, 237.
6.
HilgerothE. ‘Heat transfer for jet flow perpendicular to the exchange surface’, Technology, Lond.196537 (No. 12), 1264.
7.
GardonR. ‘A transducer for measurement of heat-flow rate’, J. Heat Transfer, Trans. Am. Soc. mech. Engrs196082, 396.
8.
GardonR.CobonpueJ. ‘Heat transfer between a flat plate and jets of air impinging on it’, Proc. 2nd Int. Heat Transfer Conf. 1962 (American Society of Mechanical Engineers, New York).
9.
ChiltonT. H.ColburnA. P. ‘Mass transfer (absorption) coefficients’, Ind. Engng Chem.193426, 1183.
10.
FrancisW. E.MoppettB. E.ReadG. P. ‘Studies of flow patterns and convection in rapid heating furnaces using model techniques’, J. Instn Gas Engrs19677, 335.
11.
DaviesR. M.LucasD. M.MoppettB. E.GalsworthyR. A. ‘Isothermal model studies of rapid heating furnaces’, J. Inst. Fuel197144, 453.
12.
OwenF. K.Heat transfer from plain and finned cylinders in cross flow M. Sc. Thesis, University of Wales, 1966.
13.
WongP. W. ‘Mass and heat transfer from circular finned cylinders’, J. Instn Heat. Vent. Engrs196034, 1.
14.
KriethF.TaylorJ. H.ChongJ. P. ‘Heat and mass transfer from a rotating disc’, J. Heat Transfer, Trans. Am. Soc. mech. Engrs195981, 95.
15.
SherwoodT. K.BryantH. S. ‘Mass transfer through compressible turbulent boundary layers’, Can. J. chem. Engng195935, 51.
16.
SherwoodT. K.TrassO. ‘Sublimation mass transfer through compressible layers on a flat plate’, J. Heat Transfer, Trans. Am. Soc. mech. Engrs196082, 313.
17.
KriethF.Principles of heat transfer1959 (International Text Book Co., Scranton, Pennsylvania).
18.
SkifstadJ. G. ‘Aerodynamics of jets pertinent to V. T. O. L. aircraft’, J. Aircraft19707 (No. 3), 193.
