The method of Kryloff and Bogoliuboff is used to investigate the non-linear oscillation of a system incorporating*** a Hooke's joint. It is found that the system ultimately executes a limit cycle of oscillation and that, in certain critical speed ranges, the amplitude of this oscillation is large if the system is lightly damped.
Get full access to this article
View all access options for this article.
References
1.
PorterB.‘A theoretical analysis of the torsional oscillation of a system incorporating a Hooke's joint’, J. mech. Engng Sci.19613, 324.
2.
GregoryR. W.‘Non-linear oscillation of a system having variable inertia’, Ph.D. Thesis, University of Durham, 1954.
3.
BrookD. L.‘Shock-excited non-linear oscillation of a system having variable inertia’, Ph.D. Thesis, University of Cambridge, 1958.
4.
KryloffN.BogoliuboffN.Introduction to nonlinear mechanics1943 (Princeton University Press).
5.
AndronowA.WittA.‘Zur Theorie des Mitnehmens von Van der Pol’, Arch. Elektrotech.193024, 99.
6.
EngelF. V. A.‘Non-dimensional groups and the model laws of dynamic similarity’, Engineer, Lond.1954198, 637.
7.
EngelF. V. A.‘Non-dimensional groups as criteria of process plant dynamics’, Engineer, Lond.1958206, 479.
8.
LadenburgR.‘Über den Einfluss von Wänden auf die Bewegung einer Kugel in einer reibenden Flüssigkeit’, Ann. der Physik190723.
9.
FaxénH.‘Einwirkung der Gefasswände auf den Winder-stand gegen die Bewegung einer kleinen Kugel in einer zapen Flüssigkeit’, Uppsala 1921.
10.
McNownJ. S.LeeH. M.McPhersonM. B.EngezS. M.‘Influence of boundary proximity on the drag of spheres’, Proc. 7th Int. Congr. Appl. Mech.19482, 17.
11.
DavidsonJ. F.PaulR. C.SmithM. J. S.DuxburyH. A.‘Rise of bubbles in fluidized beds’, Trans. Inst. Chem. Eng.195937, 323.
12.
RoweP. N.PartridgeB. A.LyallE.ArdranG. M.‘Bubbles in fluidized beds’, Nature1962195, 278.
13.
DavidsonJ. F.Contribution to discussionTrans. Inst. Chem. Eng.196139, 230.
14.
RoweP. N.‘Effect of bubbles on gas/solids contacting in fluidized beds’, 54th Annual Meeting A.I.Chem.E., New York, December 1961 (to be published).
15.
GoldsteinS.Modern developments in fluid dynamics1938 (Oxford University Press).
16.
RouseH.Advanced mechanics of fluids1959 (John Wiley, New York).
17.
BooyM. L.‘Influence of channel curvature on flow, pressure distribution and power requirements of screw pumps and melt extruders’, Amer. Soc. mech. Engrs1962 paper 62-WA-87.
18.
RotemZ.ShinnarR.‘Non-Newtonian flow between parallel boundaries in linear movement’, Chem. Engng Sci.196115, 130.
19.
De-HavenE. S.‘Extruder design for a pseudoplastic fluid’, Ind. Engng Chem.195951, 813.
20.
RotemZ.ShinnarR.‘Non-Newtonian flow between parallel boundaries in linear movement II: non-isothermal flow’, Chem. Engng Sci.196217, 53.
BallW. E.ColwellR. E.‘Limiting pressure gradients in the flow of viscous fluids’, Amer. Inst. Chem. Engrs, 43rd nat. meeting (Tulsa, 1960) paper N.
23.
ColwellR. E.‘The response of polymer melts to shear’, Int. Congr. Technology of Plastics Processing (Amsterdam, 1960).
24.
ZorevN. N.‘Results of work in the field of the mechanics of the metal cutting process’, Proc. Conf. Technology Engng Manufacture, Instn mech. Engrs, Lond. 1958, 255.
25.
LoladseT. N.Das Zusammenwirken von Werkzeug- und Werkstuckstoff beim Schneiden von Metallen’, Industrie-Anzeiger1959 (62), 21.
26.
WallaceP. W.‘An investigation on the friction between chip and tool in metal cutting’, Thesis, Royal College of Advanced Technology, Salford, 1962.
27.
NakayamaK.‘Studies on the mechanism of metal cutting’, Bull. Faculty Engng, Yokohama Nat. Univ.19587, 1.
28.
AndreevG. S.‘Photoelastic study of stresses in a cutting tool by means of cinematography’ (in Russian), Vestnik Mashinostroeniya195838 (5), 54.
29.
KattwinkelW.‘Untersuchungen an Schneiden spanender Werkzeuge mit Hilfe der Spannungsoptik’, Industrie-Anzeiger1957 (36), 29.
30.
AlbrechtP.‘New developments in the theory of the metal cutting process: 1. The ploughing process in metal cutting’, Trans. Amer. Soc. mech. Engrs1959 paper no. 59-A-243.
