The Dual Roles of Design and Surface Treatment in Combating Fatigue Failures

Wood W. A. Davies R. B. . “Effects of Alternating Strain on the Structure of a Metal.” Proc. Royal Soc. A, Vol. 220

Karpov A. V. . “Fatigue Problems in Structural Designs.” Metals and Alloys, December 1939

Hankins G. A. Becker M. L. Mills H. R. . “Effect of Surface Conditions on Fatigue Resistance of Steels.” Journal, Iron and Steel Institute, 1936

Jacobsen L. S. . “Torsional Stress Concentrations in Shafts.” Trans. A.S.M.E., 47, 1925

Grover H. J. Gordon S. A. Jackson L. R. . “Fatigue of Metals and Structures.” U.S. Bureau of Aeronautics, Dept. of the Navy, 1954

Phillips C. E. Low A. C. . “Research and Failures of Metals in Service.” Institute of Marine Engineers, Trans. Vol. 71, No. 12, pp. 357–365, December 1959

Lehr E. . “Shape and Utilisation of Material.” Stahl und Eisen No. 61, 1941

Horger O. J. Neifert H. R. . “Fatigue Strength of Large Machined Forgings.” Proc. A.S.T.M., Vol. 39, 1939

Wilson W. M. . “Fatigue Tests on Welded Joints in Structural Steel Plates.” University of Illinois Bulletin No. 327, February 1941

Cummings H. K. . “Case Hardening and Chromium Plating Data.” Unpublished Report, Bureau of Aeronautics, U.S.N. Report 1937

Mehr L. Oberg T. T. Teres J. . “Fatigue Limit of Chromium Plated Steels.” U.S.A.A.F. Technical Report No. 5125, 1944

Barklie R. H. D. Davies H. J. . “The Effect of Surface Conditions and Electro Deposited Metals on the Resistance of Materials to Repeated Stresses.” Proc. I.Mech.E. 1930, No. 3

Cazaud R. . “The Fatigue of Metals.” Chapman and Hall, London, 1953

Lea F. C. . “The Penetration of Hydrogen into Metal Cathodes and its Effect upon the Tensile Properties of Metals and their Resistance to Repeated Stresses, with a Note on the Effect of Non-Electrolitic Baths and Nickel Plating on these Properties.” Proc. Royal Soc. Vol. 123, 1929

Swanger W. H. France R. O. . “Effect of Zinc Coatings on the Endurance Properties of Steel.” Proc. A.S.T.M. Vol. 32. 1932

Gilde W. . “Increasing the Fatigue Strength of Butt Welded Joints.” Symposium on the Fatigue of Welded Structures, B.W.R.A., 1960

Likhtman V. I. Rehbinder P. A. Karpenko C. V. . “The Effect of Surface Active Media on the Deformation of Metals.” D.S.I.R. translation of an original Russian text

Frankel H. E. Bennett J. A. Holshouser W. L. . “The Effect of Oleophobic Films on Metal Fatigue.” U.S. National Bureau of Standards, Journal of Research, Vol. 64.C, No. 2, 1960

Frost N. E. . “The Effect of a Non-corrosive Environment on the Propagation of Fatigue Cracks in Mild Steel.” N.E.L. Report No. 89

Puchner O. . “Welded Gusset Plate Connections, their Fatigue Strength and its Increase by Local Annealing.” Schweisstechnik, Vol. 6, No. 4, 1956

de Leiris H. . “On Means of Raising the Fatigue Strength of certain Welded Assembles used in Shipbuilding.” Association Maritime et Aeronautique, 1960

Wöhler A. . “Investigations into the Forces Affecting Railway Axles.” Bauwesen, 13, 1863. See also:—

Schneider V. . “A Consideration of the Stressing of Railway Wheel Sets since August Wöhler.” Glasers Annalen, Vol. 82, No. 7, July 1958

Horger O. J. . “Influence of Fretting Corrosion on the Fatigue Strength of Fitted Members.” A.S.T.M. Special Technical Pubn. 144, 1952

V.S.M. 14331. “The Rational Design of Shafts.” Swiss Standard

Kammerer A. . “Design of Axles.” S.N.C.F. Technical Note, 1962

Horger O. J. Buckwalter T. V. . “Fatigue Strengths of 2 in. diameter Axles with Surfaces Metal Coated and Flame Hardened.” A.S.T.M. Paper No. 32, June 1940

Horger O. J. Cantley W. I. . “Designs of Crankpins for Locomotives.” Trans. A.S.M.E. 68, 1948

Cox E. C. . “An Assessment of Wagon Spring Performance.” B.R. Research Dept. Report No. E.417, October 1962