Medical grade alumina in a porous form, as well as the normal dense form, have been tested in a crossed-cylinder wear machine under conditions which reproduce those to be found in heart valves. The results show steady wear rates. For dense alumina pairs this rate is 9.9 × 10–7 mm3 (Nm)–1; for porous pairs it is about 10 times higher. A dense alumina valve prosthesis using a hinge mechanism is estimated from this data to have a useful life of about 45 years.
Get full access to this article
View all access options for this article.
References
1.
EbertR.SchaldachM. (1978) Rutile ceramics as an alternative in cardiovascular design. Proc. European Soc. Artificial Organs, V, 42–45.
2.
GentleC. R.ArundelP. A.HamiltonD. I.SwalesP. D. (1981) Development of a twin-flap, porous ceramic, mitral valve prosthesis. J. Biomed. Engng, 3, 3–8.
3.
GeroulanosS.EgleffL.TurinaM.SenningA. (1978) Scanning electron microscopy evaluation of glutaraldehyde-conditioned porcine tissue valves. Proc. European Soc. Artificial Organs, V, 13–16.
4.
HeimkeG.GrissP.JentschuraG.WernerE. (1980) Bio-inert and bio-active ceramics in orthopaedic surgery. Mechanical properties of biomaterials (Eds HastingsW. G.WilliamsD. F.) John Wiley, Chichester, Chapter 15.
JudenH.GentleC. R.DowsonD. (1983) Scanning electron microscopy examination of a porous alumina prosthetic heart valve. Biomaterials, 4, 139–141.
7.
WallbridgeN.DowsonD.RobertsE. W. (1983) A study of the wear of sliding pairs of high density polycrystalline aluminium oxide with particular reference to their use in total replacement joints. Engng Med. 12, 23–28.
