Wear of Artificial Joint Materials IV

Capazzo A. Cini L. Pizzoferrato A. Trentani C. Cortesi S. (1977) Evaluation of hip arthroprostheses by means of body environment simulators. J. Biomed. Matls. Res., 11, 657–669.

Charnley J. (1967) Total prosthetic replacement for advanced coxarthosis. Internal Report No. 0, Center for Hip Surgery, Wrightington Hospital, England.

Charnley J. (1979) In Low friction arthoplasty of the hip, Springer Verlag, New York.

Clarke I. C. (1978) Friction and wear of total joint replacements; wear comparators, simulators and clinical reality. Paper presented at work-shop on Mechanical failure of total joint replacements, Amer. Acad. Orthop. Surg., Atlanta.

Clarke I. C. (1981a) Friction and wear studies I: Validity of wear-screening protocols. Engineering in Medicine, 10, No. 3.

Clarke I. C. (1981b) Wear of polymeric prosthesis—clinical reality, retrieved implants and laboratory predictions. In Implant retrieval: material and biological analyses, pp 471–499, US Dept. Commerce, Maryland.

Clarke I. C. McKellop H. A. (1976) Patterns of wear produced in vivo on total joint replacements. In 21st National SAMPE Symposium—Bicentennial Materials Progress, 21, 522–531, Los Angeles.

Clarke I. C. McGuire P. J. Hull D. Okuda R. Sarmiento A. (1981a) Quantitative laboratory wear studies of hip prostheses. Trans. Orthop. Res. Soc., 6, 185.

Clarke I. C. Espiritu E. Hull D. McKellop H. A. McGuire P. Okuda R. Sarmiento A. (1981b) Correction for fluid absorption in sterile polyethylene components. Trans. Biomat. Soc., 62.

Clarke I. C. McKellop H. Markolf K. Amstutz H. (1981c) Polyethylene wear. In Prosthetic joints in evaluation of artificial joints, Ch. 10, Edited by Dowson D. Wright V. , F. S. Moore Ltd., London.

Dietschi C. (1976) Thesis data reported by Niederer et al, 1978.

Dowson D. (1978) Tribological characteristics of polymers with particular reference to polyethylene. In Polymer surfaces, edited by Clark D. T. Feast W. J. , John Wiley and Sons, London, pp 399–424.

Duff-Barclay I. Spillman D. T. (1967) Total human hip joint prostheses—a laboratory study of friction and wear. Proc. Instn. Mech. Engrs., 181, Pt. 3J, 90–103.

Dumbleton J. H. (1977) Joint simulators. In Evaluation of artificial joints, pp 47–49, Bio. Eng. Soc., London.

Gruen T. A. Espiritu E. T. McGuire P. Hull D. Sarmiento A. (1981) In vivo performance of titanium alloy total hip replacement femoral components. In ASTM symposium on use of titanium, Phoenix, Arizona (in press).

Linn F. C. (1967) Lubrication of animal joints. I—The Arthrotripsometer. J. Bone Jt. Surg., 49A, 1079–1098.

McKellop H. (1981) Friction and wear of total joint replacements II Development of multi-channel pin-on-flat wear tester. Engineering in Medicine, 10, 123–136.

McKellop H. A. Clarke I. C. McGuire P. Hull D. Sarmiento A. (1981) Wear of titanium 6A1-4V implant alloy. In ASTM symposium on use of Titanium, Phoenix, Arizona (in press).

McKellop H. Clarke I. C. Markolf K. Amstutz H. (1978) Wear characteristics of UHMW polyethylene: A method for accurately measuring extremely low wear rates. J. Biomed. Matls. Res., 12, 895–927.

McKellop H. A. Clarke I. Markolf K. Amstutz H. C. (1979) Wear properties of new high strength alloy for prosthetic joints. Trans. Orthop. Res. Soc., 71.

McKellop H. Clarke I. Markolf K. Amstutz H. (1981) Friction and wear properties of polymer, metal and ceramic prosthetic joint materials evaluated on a multi-channel screening device. Journal of Biomed. Matls. Res. (in press).

Niederer P. Semlitsch M. Doerre E. Dietschi C. (1978) Total hip arthroplasty with ceramic-polyethylene articulation. Scientific ex-hibit presented at SICOT1978 XIV World Congress, Kyoto, Japan.

Newman P. H. Scales J. T. (1951) The unsuitability of polyethylene for movable weight-bearing prostheses. J. Bone Jt. Surg., 33B-3, 392–398.

Nusbaum H. J. Rose R. M. (1979) The effects of radiation sterilisation on the properties of ultra high molecular weight poly-ethylene. J. Biomed. Matls. Res., 13, 557–576.

Nusbaum H. J. Rose R. M. Paul I. L. Crugnola A. M. Radin E. L. (1979) Wear mechanisms for ultra high molecular weight poly-ethylene in the total hip prosthesis. J. App. Polymer. Sci., 23, 277–286.

Paul I. L. Radin E. L. Rose R. M. (1973) Biomechanical aspects of orthopaedic implants. In Perspectives in biomedical engineering, edited by Kenedi R. M. , University Park Press, Baltimore.

Paul J. P. (1966–67) Forces transmitted by joints in the human body. Proc. Instn. Mech. Engrs., Lubrication and wear in living and artificial human joints, 181, Pt. 3J, 8–15.

Paul J. P. McGrouther D. A. (1975) Forces transmitted at the hip and knee joint of normal and disabled persons during a range of activities. Acta Orthop. Belg., 41, Supp 1, 78–88.

Rose R. (1979) Wear mechanisms and wear debris in total joint pros-theses. Bull Hosp. Jt. Dis., 40, 116–119.

Rose R. M. Crugnola A. Ries M. Cimino W. R. Paul I. Radin E. L. (1979) On the origins of high in vivo wear rates in polyethylene components of total joint prostheses. Clin. Orthop., 145, 277–286.

Rose R. M. Crugnola A. N. Nusbaum H. J. Paul I. L. Simon S. R. Radin E. L. (1977a) Comparative evaluation of Muller-type polyethylene acetabular components for total hip joint prostheses. Trans. 3rd Ann. Soc. Biomat., 1, 116.

Rose R. M. Nusbaum H. J. Crugnola A. Radin E. L. (1977b) The effect of ionizing radiation on ultra high molecular weight. Trans. 3rd Ann. Meeting Soc. Biomat., 1, 117.

Rose R. Nusbaum H. Schneider H. Ries S. Paul I. Crugnola A. Simon S. Radin E. (1980) On the true wear rate of ultra high molecular weight polyethylene in the total hip prosthesis. J. Bone Jt. Surg., 62A, 537–549.

Rose R. M. Schneider H. Ries M. Paul I. (1978) A method for the quantitative recovery of polyethylene wear debris from the simulated service of total joint prostheses. Wear, 51, 77–84.

Rose R. M. Schneider H. Ries M. Paul I. Crugnola A. Simon S. R. Radin E. L. (1979) Quantitative recovery of polyethylene wear debris and the relative wear rates of total joint prostheses. Trans. Orthop. Res. Soc., 68.

Sarmiento A. Gruen T. A. Espiritu E. T. Barnhart C. R. Tarr R. R. Clarke I. C. (1981) Clinical reality of a titanium alloy total hip replacement. Scientific exhibit, AAOS, Las Vegas.

Scales J. T. (1957) The unsuitability of nylon weight-bearing pros-theses articulating with bone or cartilage. Acta Orthop. Scand., 27, 1.

Scales J. T. (1972) Some aspects of Stanmore total hip prostheses and their development. In Arthroplasty of the hip, Edited by Chapchal, G. Thieme, Stuttgart, 1972.

Scales J. T. Kelly P. Goddard D. (1969) Friction torque studies of total joint replacements. The use of a simulator. Ann Rheum Dis., 28, 30, 30–35.

Scales J. T. Lowe S. A. (1972) Choosing materials for bone and joint replacements. Engineering in Medicine, 1, 52–56.

Scales J. T. Winter G. D. (1974) Clinical considerations in the choice of materials for orthopaedic internal prostheses. In 6th Ann. Intern. Biomater. Symp., Clemson, S. California.

Scales J. T. Wright K. W. J. (1975) Experimental methods for the assessment of wear of materials potentially useful for endoprostheses, Acta Orthop. Belg., 41, 160–168.

Scales J. T. Zarek J. M. (1954) Biomechanical problems of the original Judet Prosthesis, Brit. Med. J., i, 10007, May 1.

Semlitsch M. (1972) Increased wear resistance of radiochemically treated polyester for bioengineering applications in joint surgery. Sulzer Technical Report No. 118, Sept.

Semlitsch M. (1976) Technical progress in artificial hip joints. Eng. in Med., 3, 256–274, Berlin.

Semlitsch M. Lehman M. Weber H. Doerre E. Willert H. (1977) New prospects for a prolonged functional life-span of artificial hip joints by using the material combination of polyethylene/aluminium oxide ceramic/metal. J. Biomed. Matls. Res., 2, 537–552.

Simon S. R. Radin E. L. (1973) Lubrication and wear of the Charnley, Charnley-Muller, and McKee-Farrar prostheses with special regard to their clinical behavior. In The hip, Ch. 5, pp 33–45.

Simon S. R. Paul I. L. Rose R. M. Radin E. L. (1975) Stictionfriction of total hip prosthesis and its relationship to loosening. J. Bone Jt. Surg., 57A, 226–230.

Swanson S. A. V. (1977) Limitations of joint simulators. In Evaluation of artificial joints, pp 37–46, Bio. Eng. Soc., London.

Treharne R. W. (1978) In vitro testing of the R.M.C. total knee. R and D Technical Monograph No. 3468, Richards Mfg Co. Inc.

Treharne R. W. (1980) Resurfacing of the patello-femoral joint. Technical Bulletin No. 3910, Richards Mfg Co. Inc.

Treharne R. W. Young R. W. Young S. R. (1981) Wear of artificial joint materials III. Computer-controlled wear simulations of the knee joint performance. Engineering in Medicine, 10, 137–142.

Ungethum M. (1976) Requirements of operational tests and test results in total hip and knee arthroplasty. Eng. in Med., 2, 493–518, Springer-Verlag, Berlin.

Villacin A. B. Bullough P. G. (1977) The response of the tissue to implanted joint endoprostheses. In Human joints and their artificial replacements, pp 409–422, C. C. Thomas Pub., Springfield, Ill.

Weber B. G. Semlitsch M. (1972) Total hip replacement with rotation-endoprosthesis: problem of wear. 5th Int. Symp. Nijmegen, Netherlands, pp 71–74.

Willert H. Semlitsch M. (1976) Tissue reactions to plastic and metallic wear products of joint endoprostheses. In Total hip prostheses, pp 205–239, Williams and Wilkins, Baltimore.

Weightman B. O. Paul I. L. Rose R. M. Simon S. R. Radin E. L. (1973) A comparative study of total hip replacement prostheses. J. Biomech., 6, 299–311.

Weightman B. O. Simon S. Paul I. L. Rose R. M. Radin E. L. (1972) Lubrication mechanism of hip joint replacement prostheses. J. Lub. Tech., Trans. ASME, 94, 131–135.

Wright K. W. J. Scales J. T. (1977) Stanmore hip joint simulators for study of total hip joint replacements. In Evaluation of artificial joints, edited by Dowson D. Wright V. , pp 9–17, Biol. Eng. Soc., London.

Wright K. W. J. Scales J. T. (1980) The use of hip joint simulators for the evaluation of wear of total hip prostheses. In Evaluation of biomaterials, edited by Winter G. D. Leray J. L. Le Groot K. , John Wiley and Sons, pp 135–146.