Wear of Artificial Joint Materials I

Amstutz H. (1968) Polymers as bearing materials for total hip replacement: A friction and wear analysis. J. Biomed. Math Res., 3, 547–568.

Amstutz H. C. Lodwig M. (1976) Wear of polymeric bearing materials: The effects of in vivo implantation. J. Biomed. Matls. Res., 10, 25–31.

Atkinson J. R. Brown K. J. Dowson D. (1978) The wear of high molecular weight polyethylene against dry stainless steel in unidirectional motion. J. Lubr. Technol., Trans, ASME, 100, 208–218.

Atkinson J. R. Dowling J. Cicek R. (1980) Materials for internal prostheses: The present position and possible future developments. Biomaterials, 1, 89–96.

Brown K. J. Atkinson J. R. Dowson D. Wright V. (1975) The wear of ultra high molecular weight polyethylene with reference to its use in prostheses. In. Plastics in medicine and surgery, pp 2.1–2.8, Plastic and Rubber Institute, London.

Buchholz H. W. Strickle E. (1976) Is the congruence of the components of the total hip and fine polish of the metallic head really an advantage? Richards Manufacturing Company, Technical Report, Tennessee.

Charnley J. (1966–1967) Factors in the design of an artificial hip joint. Paper 2 in Lubrication and wear in living and artificial human joints. Proc. Instn. Mech. Engrs., 181, Pt. 3J, 104–111.

Charnley J. (1974) The status of research into the wear of high molecular weight polyethylene in total hip replacement. Centre for Hip Surgery, Wrightington Hospital, Internal Publ. No. 49, pp 1–19.

Charnley J. (1973) Tissue reactions to polytetrafluoroethylene. Lancet, i.

Charnley J. (1975) The wear of materials in the hip joint. In Plastics in Medicine and Surgery pp 3.1–3.10, Plastics and Rubber Institute London.

Charnley J. (1979) Low friction arthoplasty of the hip, Springer-Verlag, New York.

Charnley J. Kamangar A. (1969) The optimum size of prosthetic heads in relation to the wear of plastic sockets in total replacement of the hip. Med. Biol. Engng., 7, 31–39.

Chandler H. P. Wixson R. L. (1979) A five year review of total hip replacements in patients under the age of 30 with emphasis on loosening. Paper presented at AAOS, San Francisco.

Clarke I. C. (1978) Friction and wear of total joint replacements; wear comparators and simulators. Presented at workshop on mechanical failure of total joint replacements, Document 916-78, Amer. Acad. Orthop. Surg., Atlanta.

Clarke I. C. (1980) Wear of polymeric prostheses — clinical reality, retrieved implants and laboratory predictions. In Implant retrieval: material and biological analysis, National Bureau of Standards, Bulletin No. 601, pp 471–499.

Clarke I. C. (1981a) Wear of artificial joint materials IV. Hip joint simulators. Engineering in Medicine (to be published).

Clarke I. C. (1981b) Friction and wear studies of biomaterials. Clinical and laboratory performance. In Critical reviews in bioengineering, edited by Bourne J. R. , (to be published).

Cole W. (1979) Arthritis, new treatment, new drugs, new hope, Family Circle, 14, 145–148.

Dowling J. M. Atkinson J. R. Dowson D. Charnley J. (1978) The characteristics of acetabular cups worn in the human body. J. Bone Jt. Surg., 60B, 375–382.

Dowson D. Walker P. S. Longfield M. D. Wright V. (1970) A joint simulating machine for load-bearing joints. Med. and Biol. Engng., 8, 37–43.

Duff-Barclay I. Spillman D. (1966–67) Total human hip joint prostheses — a laboratory study of friction and wear. Proc. Instn. Mech. Engrs., 181, Pt 3J, 90–103.

Dumbleton J. H. Shen C. (1974) A study of the wear of some materials in connection with total hip replacement. Wear, 29, 163–171.

Dumbleton J. H. Shen C. (1976) The wear behavior of ultrahigh molecular weight polyethylene. Wear, 37, 279–289.

Dumbleton J. H. (1977) Limitations of joint simulators. In Evaluation of artificial joints, edited by Dowson D. Wright V. , 47–49, Biol. Engng. Soc., London.

Galante J. O. Rostoker W. (1973) Wear in total hip prostheses. An experimental evaluation of candidate materials. Acta. Orthop. Scand. Suppl., 145.

Galante J. O. Rostoker W. (1973) Wear in total hip prostheses. An experimental evaluation of candidate materials, Acta. Orthop. Scand. Suppl., 145.

Halley D. Charnley J. (1975) Rate of wear in total hip replacement. Clin. Orthop., 112, 170–179.

Homsy C. King J. (1972) Friction and wear behavior of prosthetic cartilage materials under simulated in vivo conditions. Presented at the 18th Annual Meeting of the Orthop. Res. Soc.

McKellop H. A. (1981) Friction and wear of total joints II. Development of a wear-screening protocol using a multi-channel test machine. Engineering in Medicine, this issue.

McKellop H. Clarke I. C. Markolf K. Amstutz H. (1977) Polyethylene wear in prosthetic joints. In Evaluation of artificial joints, ch. 10, edited by Dowson D. Wright V. , F. S. Moore Ltd, London.

McKellop H. Clarke I. C. Markolf K. Amstutz H. (1978) Wear characteristics of UHMW polyethylene: A method for accurately measuring extremely low wear rates. J. Biomed. Matls. Res., 12, 895–927.

McKellop H. Clarke I. C. Markolf K. Amstutz H. C. (1979) Wear properties of new high strength alloys for prosthetic joints. Trans. Orthop. Res. Soc., 4, 71, San Francisco.

Mendes D. G. Figarola F. Bullough P. G. Loudis P. (1975) High density polyethylene prosthetic femoral head replacement in the dog. Clin. Orthop., 111, 274–283.

Miller D. Ainsworth R. Dumbleton J. Page D. Miller E. Shen C. (1974) A comparative evaluation of the wear of ultra high molecular weight polyethylene abraded by Ti-6A1-4V. Wear, 28, 207–216.

Niederer P. Semlitsch M. Doerre E. Dietschi C. (1978) Total hip arthroplasty with ceramic-polyethylene articulation. Scientific exhibit presented at SICOT 78 XIV World Congress, Kyoto, Japan, Oct.

Paul J. P. (1966–67) Forces transmitted by joints in the human body. Lubrication and wear in living and artificial human joints. Proc. Instn Mech. Engrs, 181, Pt. 3J. 8–15.

Paul J. P. McGrouther D. A. (1975) Forces transmitted at the hip and knee joint of normal and disabled persons during a range of activities. Acta. Orthop. Belg., 41, Suppl. 1, 78–88.

Pawluck R. J. Eftekhar N. S. (1976) In vitro performance of a low friction hinged-knee prosthesis. Trans Orthop. Res. Soc., 1, 56.

Revell P. A. Weightman B. Freeman M. A. R. Roberts B. V. (1978) The production and biology of polyethylene wear debris. Arch. Orth. Traum. Surg., 91, 167–181.

Rose R. Nusbaum H. Schneider H. Ries R. Paul I. Crugnola A. Simon S. Radin E. (1978) A method for the quantitative recovery of polyethylene wear debris from the simulated service of total joint prostheses. Wear, 51, 77–84.

Rose R. Nusbaum H. Schneider H. Ries S. Paul I. Crugnola A. Simon S. Radin E. (1980) On the true wear rate of ultra high molecular weight polyethylene in the total hip prosthesis. J. Bone Jt. Surg., A.

Rose R. M. Crugnola A. Ries M. Cimino W. R. Paul I. Radin E. L. (1979) On the origins of high in-vivo wear rates in polyethylene components of total joint prostheses. Clin. Orthop., 145, 277–286.

Rostoker W. Galante J. O. (1976) Some new studies of the wear behavior of ultra high molecular weight polyethylene. J. Biomed. Matls. Res., 10, 303–310.

Rostoker W. Galante J. O. (1979) Contact pressure dependance of wear rates of ultra high molecular weight polyethylene. J. Biomed. Matls Res., 13, 957–964.

Rutt A. (1977) Zur Atiopathogenese der aseptischen Auslockerung von Huftgelenktotal endoprothesen. (Etiopathogenesis of loosening after total hip replacement). Arch. orthop. Unfall Chir., 88, 139–152.

Salvati E. A. Wright T. M. Burstein A. H. Jacobs B. (1979) Fracture of polyethylene acetabular cups. J. Bone and Jt. Surg. 61A, 1239–1242.

Sclippa E. Piekarski K. (1973) Carbon-fibre reinforced polyethylene for various possible orthopaedic uses. J. Biomed. Matls Res., 7, 59–70.

Seedhom B. Dowson D. Wright V. (1973) Wear of solid phase formed high density polyethylene in relation to the life of artificial hips and knees. Wear, 24, 35–51.

Semlitsch M. (1974) Technical progress in artificial hip joints. Sulzer Technical Review, 4.

Shen C. Dumbleton J. H. (1976) The friction and wear behavior of polyoxymethylene in connection with joint replacement. Wear, 38, 291–303.

Swanson S. A. V. (1977) Limitations of joint simulators. In Evaluation of artificial joints, edited by Dowson D. Wright V. , p. 42, Biol. Eng. Soc. London.

Townley C. O. (1979) Total articular replacement arthroplasty with the femoral cup. Clin. Orthop., 143, 293.

Treharne R. W. (1978) In vitro testing of the RMC total knee, Technical bulletin No. 3468, Richards Manufacturing Company, Memphis.

Treharne R. W. Young R. W. Young S. R. (1979a) In vitro testing of total knee implant devices. Trans Orthop. Res. Soc., 4, 295.

Treharne R. W. Carignan R. G. Young R. W. Young S. R. (1979b) In vitro testing of total knee implants. Trans 11th Biomat. Symp., 3, 79.

Treharne R. W. Young R. W. Young S. R. (1981) Friction and wear of total joints II. Computer-controlled wear simulations of the knee joint performance. Engineering in Medicine, this issue.

Uchida S. Yoshino S. Doi M. Kudo H. (1980) Side effects of prosthetic materials on the human body. Intern. Orthop. (Sicot), 3, 285–291.

Ungethum M. Hildebrandt J. Jager M. Mosle H. Witt A. (1972) Pin and Disk Modelluersuche fur die Werkstoffpaarung bei Alloarthroplastischen Gelenkimplantaten. Res Exp. Med. 157, 213–216. (1972).

Villacin A. B. Bullough P. G. (1977) The response of the tissue to implanted joint endoprosthesis. In Human joints and their artificial replacements, by Walker P. S. pp 409–422. C. C. Thomas, Springfield. Illinois.

Walker P. S. Dowson D. Longfield M. Wright V. (1966–67) Friction and wear of artificial joint materials. Lubrication and wear in living and artificial human joints. Proc. Instn. Mech. Engrs., 181, Pt. 3J, 133–136.

Weber B. Struhmer G. (1976) The trunnion bearing total hip prosthesis. Engineering in Medicine, 2, In Advances in artificial hip and knee technology, edited by Schaldach M. Hohmann D. , Springer-Verlag, Berlin.

Weightman B. O. Paul I. L. Rose R. M. Simon S. R. Radin E. L. (1973) A comparative study of total hip replacement prostheses. J. Biomech., 6, 299–311.

Weightman B. Isherwood D. P. Swanson S. A. V. (1979) The fracture of ultra high molecular weight polyethylene in the human body. J. Biomed. Matls. Res., 13, 669–672.

Willert H. G. Buchhorn G. Buchhorn U. (1981) Tissue response to wear debris in artificial joints. In Implant retrieval: material and biological analysis, National Bureau of Standards, Publication No. 601, pp 239–267.

Willert H. Semlitsch M. (1976) Tissue reactions to plastic and metallic wear products of joint endoprostheses. In Total hip prostheses, pp 205–239, Williams and Wilkins, Baltimore.