The subject of this work is the derivation of a simulation model for premixed charge compression ignition (PCCI) combustion that can be used in closed-loop control development. For the high-pressure part of the engine cycle, a detailed three-dimensional computational fluid dynamics model is reduced to a stand-alone multi-zone chemistry model. This multi-zone chemistry model is extended by a mean value model accounting for the gas exchange losses. The resulting model is capable of describing PCCI combustion with stationary exactness, and is at the same time very economic with respect to computational costs. The model is further extended by the identified system dynamics that influence the stationary inputs. For this purporse, a Wiener model is set up that uses the stationary model as a non-linear system representation. In this way, a dynamic non-linear model for the representation of the controlled plant diesel engine is created.
TakedaY.KeiichiN., ‘Emission characteristics of premixed lean diesel combustion with extremely early staged fuel injection.’SAE paper 9611631996
2.
HaradaA.ShimazakiN.SasakiS.MiyamotoT.AkagawaH.TsujimuraK., ‘The effects of mixture formation on premixed lean diesel combustion.’SAE paper 9805331998
3.
IwabuchiY.KawaiK.ShojiT.TakedaY., ‘Trial of new concept diesel combustion system - premixed compression ignited combustion.’SAE paper 1999-01-0185m1999
4.
DecJ. E., ‘Advanced compression-ignition engines — understanding the in-cylinder processes.’Proc. Combust. Inst.32 (2009): 2727–2742
5.
ShaverG. M.RoelleM. J.CatonP. A.KaahaainaN. B.RaviN.HathoutJ.-P.AhmedJ.KojiA.ParkS.EdwardsC. F.GerdesJ. C., ‘A physics-based approach to the control of homogeneous charge compression ignition engines with variable valve actuation.’Int. J. Eng. Res.6 (4) (2005): 361–375 DOI: 10.1243/146808705X30512
6.
BengtssonJ.StrandhP.JohanssonR.TunestälP.JohanssonB., ‘Hybrid control of homogeneous charge compression ignition (HCCI) engine dynamics.’Int. J. Control79 (2006): 422–448
7.
NarayanaswamyK.RutlandC. J., ‘A modeling investigation of combustion control variables during DI-diesel HCCI engine transients.’SAE paper 2006-01-1084, 2006
8.
HillionM.ChauvinJ.GrondinO.PetitN., ‘Active combustion control of diesel HCCI engine: Combustion timing.’SAE paper 2008-01-0984, 2008
9.
HillionM.BuhlbuckH.ChauvinJ.PetitN., ‘Combustion control of diesel engines using injection timing.’SAE paper 2008-01-0367, 2009
10.
NakayamaS.IbukiT.HosakiH.TominagaH., ‘An application of a model based combustion control to transient cycle-by-cycle diesel combustion.’SAE paper 2008-01-1311, 2008
11.
TurinR.ZhangR.ChangM.-F., ‘Systematic model-based engine control design.’SAE paper 2008-01-0994, 2008
12.
NarayanaswamyK.HesselR. P.RutlandC. J., ‘A new approach to model DI-diesel HCCI combustion for use in cycle simulation studies.’SAE paper 2005-01-3743, 2005
ShaverG. M.RoelleM. J.GerdesJ. C., ‘Modeling cycle-to-cycle dynamics and mode transition in HCCI engines with variable valve actuation.’Control Engng Pract.14 (2006): 213–222
15.
AlbrechtA.GrondinO.Le BerrF.Le SolliecG., ‘Towards a stronger simulation support for engine control design: A methodological point of view.’Oil Gas Sci. Technol. — Rev. IFP62 (2007): 437–456
16.
BengtssonJ.StrandhP.JohanssonR.TunestälP.JohanssonB., ‘Hybrid modelling of homogeneous charge compression ignition (HCCI) engine dynamics — a survey.’Int. J. Control80 (2007): 1814–1847
17.
PopeS. B., ‘PDF methods for turbulent reactive flows.’Prog. Energy Combust. Sci.11 (1985): 119–192
18.
ReitzR.RutlandC. J., ‘Development and testing of diesel engine CFD models.’Prog. Energy Combust. Sci.21 (1995): 173–196
19.
BarthsH.HasseC.PetersN., ‘Computational fluid dynamics modelling of non-premixed combustion in direct injection diesel engines.’Int. J. Eng. Res.1 (3) (2000): 249–267 DOI: 10.1243/1468087001545164
20.
ColinO.BenkenidaA., ‘The 3-zones extended coherent flame model (ECFM3Z) for computing premixed/diffusion combustion.’Oil and Gas Sci. Technol. — Rev. IFP59 (2004): 593–609
21.
AcevesS. M.FlowersD. L.Martinez-FriasJ.SmithJ. R.WestbrookC. K.PitzW.DibbleR.ChristensenM.JohanssonB., ‘A multi-zone model for prediction of HCCI combustion and emissions.’SAE paper 2000-01-0327, 2007
22.
AcevesS. M.FlowersD. L.Martinez-FriasJ.SmithJ. R.WestbrookC. K.PitzW.DibbleR.WrightJ. F.AkinyemiW. C.HesselR. P., ‘A sequential fluid-mechanic chemical kinetic model of propane HCCI combustion.’SAE paper 2001-01-1027, 2001
23.
BabajimopoulosA.LavoieG. A.AssanisD. N., ‘Modelling HCCI combustion with high levels of residual gas fraction — a comparison of two VVA strategies.’SAE paper 2003-01-3220
24.
BabajimopoulosA.AssanisD. N.FlowersD. L.AcevesS. M.HesselR. P., ‘A fully coupled computational fluid dynamics and multi-zone model with detailed chemical kinetics for the simulation of premixed charge compression ignition engines.’Int. J. Eng. Res.6 (5) (2005): 497–512 DOI: 10.1243/146808705X30503
25.
FlowersD. L.AcevesS. M.BabajimopoulosA., ‘Effects of charge non-uniformity on heat release and emissions in PCCI engine combustion.’SAE paper 2006-01-1363, 2006
26.
HesselR. P.FosterD. E.AcevesS. M.DavissonM.Espinosa-LozaF. J.FlowersD. L.PitzW.DecJ. E.SjobergM.BabajimopoulosA., ‘Modeling iso-octane HCCI using CFD with multi-zone detailed chemistry; comparison to detailed specification data over a range of lean equivalence ratios.’SAE paper 2008-01-0047, 2008
27.
HergartC.-A.BarthsH.SiewertR. M., ‘Modeling approaches for partially premixed compression ignition combustion.’SAE paper 2005-01-0218, 2005
28.
FelschC.SloaneT.HanJ.BarthsH.LippertA. M., ‘Numerical investigation of recompression and fuel reforming in a SIDI-HCCI engine.’SAE paper 2007-01-1878, 2007
29.
PetzoldL. R., A description of DASSL: A differential/algebraic system solver, Sandia report SAND82-8637, Sandia National Laboratories, 1982
30.
PetersN.PaczkoG.SeiserR.SeshadriK., ‘Temperature cross-over and non-thermal runaway at two-stage ignition of n-heptane.’Combust. Flame28 (2002): 38–59
FerzigerJ. H.PericM., Computational methods for fluid dynamics2002(Springer)
33.
KhalighiB.El TharyS. H.HaworthD. C.HueblerM. S., ‘Computation and measurement of flow and combustion in a four-valve engine with intake variations.’SAE paper 950287, 1995
SpiekermannP.JerzembeckS.FelschC.VogelS.GaudingM.PetersN., ‘Experimental data and numerical simulation of common-rail ethanol sprays at diesel engine-like conditions.’Atomiz. Sprays19 (2009): 357–386
BarthsH.FelschC.PetersN., ‘Mixing models for the two-way-coupling of CFD codes and zero-dimensional multi-zone codes to model HCCI combustion.’Combust. Flame156 (2009): 130–139
38.
FelschC.DahmsR.GloddeB.VogelS.JerzembeckS.PetersN.BarthsH.SloaneT.WermuthN.LippertA. M., ‘An interactively coupled CFD-multi-zone approach to model HCCI combustion.’Flow, Turbul. Combust.82 (2009): 621–641
39.
PetersN., ‘Laminar diffusion flamelet models in non-premixed turbulent combustion.’Prog. Energy Combust. Sci.10 (1984): 319–339
40.
PetersN., ‘Laminar flamelet concepts in turbulent combustion.’Symposium (International) on Combustion (1986) 211231-1250
41.
PitschH.BarthsH.PetersN., ‘Three-dimensional modeling of NOx and soot Formation in DI-diesel engines using detailed chemistry based on the interactive flamelet approach.’SAE paper 962057, 1996
42.
HasseC.PetersN., ‘A two mixture fraction flamelet model applied to split injections in a DI diesel engine.’Proc. Combust. Inst.30 (2005): 2755–2762
43.
FelschC.GaudingM.HasseC.VogelS.PetersN., ‘An extended flamelet model for multiple injections in DI diesel engines.’Proc. Combust. Inst.322009, 322775-2783
44.
WoschniG., ‘A universally applicable equation for instantaneous heat transfer coefficients in the internal combustion engine.’SAE paper 670931, 1967
45.
BaehrH. D.StephanK., Wårme- und Stoffübertragung2006 (Springer,Berlin)
46.
VanegasA.WonH.FelschC.GaudingM.PetersN., ‘Experimental investigation of the effect of multiple injections on pollutant formation in a common-rail DI diesel engine.’SAE paper 2008-01-1191, 2008
47.
WeberJ.SpiekermannP.PetersN., ‘Model calibration for spray penetration and mixture formation in a high-pressure fuel spray using a micro-genetic algorithm and optical data.’SAE paper 2005-01-2099, 2005
48.
FelschC.VanegasA.KerschgensB.PetersN.HoffmannK.DrewsP.AbelD.BarthsH., ‘Systematic reduction of an interactively coupled CFD-multi-zone approach towards a stand-alone multi-zone model for PCCI combustion.’Thiesel 2008: Thermo-and fluid dynamic processes in diesel engines, Universidad Politécnica de Valencia, Valencia, Spain, 2008
Gamma Technologies GT-POWER user's manual and tutorial, GT-SUITE version 7.0, Technical report, Gamma Technologies, 2008
51.
RichertF., Objektorientierte Modellbildung und Nichtlineare Prådiktive Regelung von Dieselmotoren PhD Thesis, RWTH Aachen University, Germany, 2005
52.
HoffmannK.DrewsP.AbelD.FelschC.VanegasA.PetersN., ‘A cycle-based multi-zone simulation approach including cycle-to-cycle dynamics for the development of a controller for PCCI combustion.’SAE paper 2009-01-0671, 2009
53.
NellesO., Nonlinear system identification: From classical approaches to neural networks and fuzzy models2000 (Springer, Berlin)
54.
PerézE.BlascoX.García-NietoS.SanchisJ., ‘Diesel engine identification and predictive control using Wiener and Hammerstein models.’ In Proceedings of the 2006 IEEE International Conference on Control Applications, Munich, Germany, 2006 (IEEE, Piscataway, NJ)
55.
SchulzeT.WiedemeierM.SchuetteH., ‘Crank angle - based diesel engine modeling for hardware-in-the-loop applications with in-cylinder pressure sensors.’SAE paper 2007-01-1303, 2007
56.
ES 1000.3 Benutzerhandbuch, technical report, ETAS GmbH, 2008
57.
GuzzellaL.OnderC. H., Introduction to modeling and control of internal combustion engine systems2004 (Springer, Berlin)
The MathWorks, Inc. Matlab 7.6 manual (R2008a). Technical report, The MathWorks, Inc. 2008
61.
EngJ. A., ‘Characterization of pressure waves in HCCI combustion.’SAE paper 2002-01-2859, 2002
62.
RWTH Aachen University and Bielefeld University. SFB 686 - Modellbasierte Regelung der homogenisierten Niedertemperatur-Verbrennung, available from http://www.sfb686.rwth-aachen.de, 2006.
63.
DrewsP.HoffmannK.BeckR.GasperR.VanegasA.FelschC.PetersN.AbelD., ‘Fast model predictive control for the air path of a turbocharged diesel engine.’European Control Conference2009, Budapest, Hungary, 2009
