Hydrodynamic similarity of cavitation flows in nozzles of different scales has been observed experimentally. In this paper a model of cavitation has been developed, taking into account the bubbly nature of cavitation and assuming local homogeneity of the vapour-liquid flow. The model of cavitation is built from correlations for evaporation and condensation, based on bubble dynamics theory, and an equation for the number density of cavitation bubbles, derived by assuming hydrodynamic similarity of cavitation flows. Compared with conventional models of cavitation, which fix the number density of cavitation bubbles, the present model takes into account the effect of liquid tension on the number density of active cavitation nuclei. The model has been implemented within the VECTIS computational fluid dynamics code and applied to the simulation of cavitating flows in nozzles.
NurickW. H.Orifice cavitation and its effect on spray mixingTrans. ASME, J. Fluids Engng, 1976, 98, 681–687.
3.
AraiM.ShimizuM.HiroyasuH.Breakup length and spray angle of high speed jet In Proceedings of the Third International Conference on Liquid atomization and spray systems (ICLASS), London, 1985, pp. IB/4/1-10.
4.
KnappR. T.DailyJ. W.HammittF. G.Cavitation, 1970 (McGraw-Hill, New York).
5.
ChisholmD.Two-phase flow in pipelines and heat exchangers, 1983 (Godwin, London).
6.
DumontN.SimoninO.HabchiC.Cavitating flow in diesel injectors and atomisation: A bibliographical review. In Proceedings of the Eighth Conference on Liquid atomization and spray systems (ICLASS 2000), Pasadena, CA, pp. 314–323.
7.
SoteriouC.AndrewsR.SmithM.Direct injection diesel sprays and the effect of cavitation and hydraulic flip on atomisation. SAE paper 950080, 1995.
8.
KimJ.-H.NishidaK.YoshizakiT.HiroyasuH.Characterization of flows in the sac chamber and the discharge hole of a D.I. diesel injection nozzle by using a transparent model nozzle. SAE paper 972942, 1997.
9.
ArcoumanisC.BadamiM.FloraH.GavaisesM.Cavitation in real-size multi-hole diesel injector nozzles. SAE paper 2000-01-1249, 2000.
10.
LecoffreY.BonninJ.Cavitation tests and nucleation control In Proceedings of the International Symposium on, Cavitation inception, 1979, pp. 141–145 (American Society of Mechanical Engineers, New York).
11.
TullisJ. P.Cavitation scale effects for valvesJ. Hydraulics Div., Proc. Am. Soc. Civ. Engrs, 1973, 99(HY7), 1109–1128.
12.
KellerA. P.Cavitation scale effects. Empirically found relations and correlation of cavitation number and hydrodynamic coefficients In Proceedings of the Fourth International Symposium on Cavitation (CAV2001); http://cav2001.library.caltech.edu.
13.
HsiaoC.-T.ChahineG. L.LiuH.-L.Scaling effect on prediction of cavitation inception in a line vortex flowTrans. ASME, J. Fluids Engng, 2003, 125, 53–60.
14.
AhujaV.HosangadiA.ArunajatesanS.Simulations of cavitating flows using hybrid unstructured meshesTrans. ASME, J. Fluids Engng, 2001, 123, 331–339.
15.
YuanW.SauerJ.SchnerrG. H.Modelling and computation of unsteady cavitation flows in injection nozzlesMec. Industries, 2001, 2, 383–394.
16.
SinghalA. K.AthavaleM. M.LiH.JiangY.Mathematical basis and validation of the full cavitation modelTrans. ASME, J. Fluid Engng, 2002, 124, 617–624.
KubotaA.KatoH.YamaguchiH.Finitedifference analysis of unsteady cavitation on a two-dimensional hydrofoil In Proceedings of the Fifth International Conference on Numerical ship hydrodynamics, Hiroshima, Japan, September 1990, pp. 667–684 (National Academic Press).
19.
ChenY.HeisterS. D.Two-phase modelling of cavitated flowsComputer Fluids, 1995, 24(7), 799–806.
20.
ChenY.HeisterS. D.Modelling hydrodynamic nonequilibrium in cavitating flowsTrans. ASME, J. Fluids Engng, 1996, 118, 172–178.
21.
KunzR. F.BogerD. A.StinebringD. R.ChyczewskiT. S.LindauJ. W.GilelingH. J.VenkateswaranS.GovindanT. R.A preconditioned Navier-Stokes method for two-phase flows with application to cavitation predictionComputer Fluids, 2000, 29, 849–875.
22.
FujimotoH. G.MishikoriT.TzumakotoT.SendaJ.Modelling of atomization and vaporization process in flash boiling spray In Proceedings of the Annual Conference on Liquid atomization and spray systems (ILASS-Europe 1994), paper VI-13 (Institute for Liquid Atomization and Spray Systems).
23.
AlajbegovicA.GroggerH. A.PhilippH.Calculation of transient cavitation in nozzle using the two-fluid modelProceedings of the 12th ILASS-Americas Annual Conference on Liquid atomization and spray systems, 1999, pp. 373–377 (Institute for Liquid Atomization and Spray Systems, Indianapolis).
24.
BlinkovV. N.JonesO. C.NigmatulinB. I.Comparison with experiments using a five-equation model for vapour void developmentInt. J. Multiphase Flow, 1993, 19(6), 965–986.
25.
FicarellaA.LaforgiaD.Experimental and numerical investigation on cavitation flows in diesel injection systemsMeccanica, 1998, 33, 407–425.
26.
HibikiT.IshiiM.Active nucleation site density in boiling systemsInt. J. Heat Mass Transfer, 2003, 46, 2587–2601.
27.
RayleighLordOn the pressure developed in a liquid during the collapse of a spherical cavityPhil. Mag., 1917, 34, 94–98.
28.
SchmidtD. P.RutlandC. J.CorradiniM. L.A fully compressible two-dimensional model of high-speed cavitating nozzleAtomization Sprays, 1999, 9, 255–276.
29.
DelaleC. F.Thermal damping in cavitating nozzle flows In Proceedings of the Fourth International Symposium on Cavitation (CAV2001), California Institute of Technology, Pasadena, CA, 2001, pp. B5.005/1-14.
30.
BunnelR. A.HeisterS. D.YenC.CollicotS. H.Cavitating injector flows: Validation of numerical models and simulations of pressure atomizersAtomization Sprays, 1999, 9, 445–465.
31.
DelannoyY.KuenyJ. L.Two phase flow approach in unsteady cavitation modelling In ASME cavitation and multiphase forum, 1990, FED-Vol. 98, pp. 153–158 (American Society of Mechanical Engineers, New York).
32.
AvvaR. K.SinghalA.GibsonD. H.An enthalpy based model of cavitation In Cavitation and gas-liquid flow in fluid machinery devices - 1995, 1995, FED-Vol. 226, pp. 63–70.
33.
DumontN.SimoninO.HabchiC.Numerical simulation of cavitating flows in diesel injectors by a homogeneous equilibrium modelling approach In Proceedings of the Fourth International Symposium on Cavitation (CAV2001), California Institute of Technology, Pasadena, CA, 2001, pp. B6.005/1-14.
34.
RoosenP.UnruhO.Cavitation-induced flow field inside fuel injector nozzles In Proceedings of the International Symposium on Automotive technology and automation (ISATA), Düsseldorf, June 1998, pp. 267–273 (Automotive Association Ltd).
35.
BasukiW.SchnerrG. H.YuanW.Singlephase and modified turbulence models for simulation of unsteady cavitation flows In Proceedings of the German-Japanese Workshop on Multiphase flow, Karlsruhe, Germany, 25–27 August 2002, pp. F14–F29 (Forschungszentrum, Karlsruhe GmbH).
36.
FrobeniusM.SchillingR.BachertR.StoffelB.LudwigG.Three-dimensional unsteady cavitation effects on a single hydrofoil and in a radial pump - measurements and numerical simulations. Part two - numerical simulation In Proceedings of the Fifth International Symposium on Cavitation, 2003, paper Cav03-GS-9-005 (Kansai University, Osaka, Japan).
37.
BilletM. L.Cavitation nuclei measurements - a review In Cavitation and multiphase flow forum, Albuquerque, New Mexico, 1985, pp. 31–37 (ASME).
38.
BrennenC. E.Cavitation and bubble dynamics, 1995, (Oxford University Press, Oxford).
39.
RoodE. P.Review - mechanism of cavitation inceptionTrans. ASME, J. Fluids Engng, 1991, 113, 163–175.
40.
GindrozB.BailoG.MateraF.ElefanteM.Influence of the cavitation nuclei on the cavitation bucket when predicting the full-scale behavior of a marine propeller In Proceedings of the 21st Symposium on, Naval hydrodynamics, 1997, pp. 839–850 (National Academic Press, Trondheim, Norway).
41.
LiuZ.BrennenC. E.Cavitation nuclei population and event ratesTrans. ASME, J. Fluids Engng, 1998, 120, 728–737.
42.
Ricardo Software VECTIS CFD, Version 3.8, User's manual, 2004 (Ricardo UK Ltd, Shoreham-by-Sea, West Sussex).
43.
YakhotV.OrszagS. A.ThanghamS.GatskiT. B.SpezialeC. G.Development of turbulence models for shear flows by a double-expansion techniquePhysics Fluids A, 1992, 4(7), 1510–1520.
