Infrared thermometry was applied to study the temperature distribution in microwave heating of diesel particulate filters. In situ non-contact temperature measurement tests were conducted using an integrated four-channel fibre-optic infrared temperature measurement and a microwave heating system. Silica light pipes, which are transparent to electromagnetic fields, were used to collect the infrared radiation from specified locations inside a filter during heating. The temporal and spatial temperature distributions in four microwave-heated diesel particulate filters with different soot and catalyst loading conditions were measured. Experimental results show the non-uniform heating inside filters. Catalyst coating, soot loading, and microwave power level all affect the heating rate and temperature distribution. Using 1 kW of microwave power, heating for 600 s can raise the temperature above 200°C in the soot-laden, catalysed filter.
BurtscherH.MatterU.SkillasG.Effect of fuel additives on diesel engine particulate emissionsJ. Aerosol Sci., 1999, 30(S1), S851-S852.
3.
MilletN. C.MenegazziP.MartinB.ColasH.Modeling of diesel particulate filter regeneration, with the effect of fuel-borne catalyst on pressure losses and soot oxidation kineticsOil Gas Sci. Technol., 2003, 58(1), 151–162.
4.
OkazoeH.ShimizuK.WatanabeY.SantiagoW.KuglandP.RuthW.Development of a full-flow burner regeneration type diesel particulate filter using SiC honeycomb. SAE paper 960130, 1996.
5.
ParkD. S.KimJ. U.ChoH.KimE. S.Considerations on the temperature distribution and gradient in the filter during regeneration in burner type diesel particulate trap system (II). SAE paper 980188, 1998.
6.
KitagawaJ.HijikataT.YamadaS.Electric heating regeneration of large wall-flow type DPF. SAE paper 910136, 1991.
7.
GarnerC. P.DentJ. C.Microwave assisted regeneration of diesel particulate traps. SAE paper 890174, 1989.
AllieM. C.VerdeganB. M.SchukarM. R.HaberkampW. C.ChengC. R.HenrichsenM. P.Regenerable filter with localized and efficient heating. US Pat. 6,540,816, 2003.
10.
BootheB. J.ShihA. J.KongJ.RobertsW. L.Goniometric characteristics of optical fibres for temperature measurement in diesel engine exhaust filtersMeasmt Sci. Technol., 2003, 14(5), 563–572.
11.
KongJ.ShihA. J.Infrared thermometry for diesel exhaust aftertreatment temperature measurement. SAE paper 2004-01-0962, 2004.
12.
KottmannJ.StenzelC.Characterization of flexible sapphire fibers in high-temperature pyrometersSensors Mater., 1999, 11(4), 233–246.
13.
JohnsonT. V.Diesel emission control in review—the last 12 months. SAE paper 2003-01-0039, 2003.
14.
GautamM.PopuriS.RankinB.SeehraM.Development of a microwave assisted regeneration system for a ceramic diesel particulate system. SAE paper 1999-01-3565, 1999.
15.
MitalR.LiJ.HuangS. C.StroiaB. J.YuR. C.AndersonJ. A.HowdenK.Diesel exhaust emissions control for light duty vehicles. SAE paper 2003-01-0041, 2003.
16.
HoffmannU.RieckmannT.Reduction of diesel particulate emissions by catalytic filtrationChem. Engng and Technol., 1994, 17(3), 149–160.
17.
DewittD. P.NutterG. D.Theory and Practice of Radiation Thermometry, 1989, pp. 625–649 (John Wiley, New York).
18.
HenrichsenM.PopuriS.Development of a microwave assisted particulate filter regeneration system. In 7th Diesel Engine Emissions Reduction Workshop (DEER), 5–9 August, 2001.
BlackwellB. E.McDonaldA. C.YonushonisT. M.Filter element with discrete heat generators and method of manufacture, US Pat. 6,379,407, 2002.
21.
StamatelosA. M.On-line regeneration control for a diesel particulate trap systemAutomatica, 1994, 30(3), 513–520.
22.
WaltonF. B.HaywardP. J.WrenD. J.Controlled energy deposition in diesel particulate filters during regeneration by means of microwave irradiation. SAE paper 900327, 1990.
