Analysis of the degree of constant volume and cooling loss in a spark ignition engine fuelled with hydrogen

Abstract

This study analyses factors influencing the thermal efficiency of a homogeneous charge spark ignition (SI) engine fuelled with hydrogen, focusing on the degree of constant volume and the cooling loss. The cooling loss from the burning gas to the cylinder walls in a homogeneous charge SI engine is quantitatively evaluated by analysing the cylinder pressure diagram and the exhaust gas composition. The degree of constant volume burning and the degree of constant volume cooling are also obtained by fitting the Wiebe function to the rate of heat release calculated using the cylinder pressure diagram. A comparison of combustion and cooling characteristics between hydrogen and methane combustion reveals that the cooling loss in hydrogen combustion is higher than that of methane combustion due to a thinner quenching distance and faster burning velocity for hydrogen combustion. It is also made clear that the higher cooling loss in hydrogen combustion results in lower thermal efficiency of hydrogen combustion as compared to that of methane combustion.

Keywords

thermal efficiency SI engine hydrogen constant volume cooling loss combustion

Get full access to this article

View all access options for this article.

References

Ricardo

H. F.

Further note on fuel research

Proc. Instn Automot. Engng 1924, 18, 327–341.

King

R. O.

Wallace

W. A.

Mahapatra

The hydrogen engine and the nuclear theory

Can. J. Res., 1948, 264.

Billings

R. E.

Woolley

R. L.

Henriksen

D. L.

Water injection in hydrogen powered IC engine. In Proceedings of the 1st World Hydrogen Energy Conference, Vol. 3, 1976, p. 27.

Lewis

von Elbe

Combustion, Flames and Explosions of Gases, 1961, pp. 331–335 (Academic Press).

List

Thermodynamik der Verbrennungskraftmaschinen, 1939, p. 71 (Springer-Verlag, Berlin).

Heywood

J. B.

Internal Combustion Engine Fundamentals, 1988, p. 82 (McGraw-Hill).

Sitkei

Kraftstoffaufbereitung and Verbrennung bei Dieselmotoren, 1964, pp. 156–159 (Springer-Verlag, Berlin).

Ferguson

C. R.

Internal Combustion Engines Applied Thermosciences, 1986, p. 386 (John Wiley).

Ramos

J. I.

Internal Combustion Engine Modeling, 1989, pp. 116–120 (Hemisphere, New York).

10.

Woschni

Universally applicable equation for instantaneous heat transfer coefficient in the internal combustion engine

SAE Paper 670931, 1967.